Power•Cleanse HM is a supreme quality, high activity filtration resin particularly selected for adsorption of copper and other toxic metals in marine, brackish and freshwater systems include planted aquariums. It will outperform fiber pads and is more economical because it can be regenerated. Its light colored beads can turn light blue or shades of gray depending on the metals adsorbed and this indicates the need for regeneration. Power•Cleanse HM is regenerable over and over again for a minimum of 2 years in normal use.
Place loosely in a 200 micron polyester filter bag or filter chamber and position to force water flow through the product. For best results, use a particulate prefilter ahead of Power•Cleanse HM, such as filter floss or fine sponge. Use about 4 ml of product per gallon of aquarium capacity, or about 1 cupful per 60 US gallons (230 L).
Regeneration should only be undertaken by persons familiar with handling strong acids. If you are not familiar and comfortable, them simply discard and purchase new. Warning: WEAR RUBBER GLOVES AND EYE GOGGLES when handling acid!! Add one part muriatic acid (available at pool supply store, observe directions and warnings on acid container) to four parts water (never add water to acid! only add acid to water). Soak resin until original color is restored or about 1 to 2 hours maximum. Discard solution. Rinse resin with fresh water 3 times and discard water. Let stand in water with 2 tablespoons of Reef•Basis KH Buffer or Flora•Viv KH+ or Basis Cichlid Buffer for 1 hour. Rinse again in fresh or salt water and test pH and make sure it is within 1 pH unit of aquarium pH and resuse as before.
Caution: Keep out of reach of children. Not for human consumption. Contains polymeric resin, if ingested drink water. If in eyes flush with water.
BorneoWild Enlive Shrimp Conditioner 100g
Enlive is a multi-purpose culture of more than 100 types of bacterial in dormant state. It helps to seed a new tank substrate system quickly as well as in new filters when dosed into water directly. It replenishes bacterial losses after a regular water change, purifies water by decomposing ammonia and nitrite.
For setting up as substrate additive, spread 6 spoon for a 60x45cm tank. For replenishing bacterial lose after water change, mix 1 spoon of ENLIVE in a mug of tank water for every 200L water.
The Seachem Algae Scraper is designed with versatility in mind. With three retractable blades: metal, plastic, and soft pad, it is suited for both glass and acrylic aquariums. It is lightweight and features an ergonomic handle making it comfortable to hold in multiple positions. In addition, it floats for easy retrieval. Finally, its white color makes it easy to see the algae you want to remove and when you’ve effectively removed it.
Sizes: 12 inches (31 cm), 18 inches (46 cm)
Easily removes tough algae in glass aquariums. Not for use on acrylic.
Safe for use on glass and acrylic. Use care at gravel line to avoid scratching acrylic
Your first choice for acrylic aquariums. Easily removes algae from scratches
$26.00The Dymax water scissors are made from stainless steel mattensite 420 (Martensitic 420), which is the same grade as stainless steel used in the manufacture of medical devices. The product is anodic oxide, which gives the scissor's surface a black finish to enhance its durability. No corrosion