Recently Added

Fluval Ribbed Hose for FX6

Sold Out

Blue Stripe Damsel (Chrysiptera Leucopoma)

$3.00

Blue Stripe Damsel (Chrysiptera Leucopoma)

Purchase Size: approx 1-2"

* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.

View full product details »

Scissortail Sergeant Mayor (Abudefduf sexfasciatus)

$2.00

Scissortail Sergeant Mayor (Abudefduf sexfasciatus)

Purchase Size: approx 1-2"

* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.

View full product details »

Yellow Tail Chromis (Neopomacentrus nemurus)

$3.00

Size: approx 1-2"

* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.

View full product details »

Bicolour Chromis (Chromis margaritifer)

$3.00

Size: approx 2"

* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.

View full product details »

Skimz CP20 Coral Plugs for Frag Rack

$11.00

Skimz Coral Plug is a single rectangular post allowing you to rotate in 90-degree increments in Skimz Frag Rack's unique cross pattern holes. This allow you to choose the best placement of the coral frags.

Skimz CP20 contains 20 Coral Plugs.

Dimensions (L x W x H): 6.00cm x 3.00cm x 10.00cm

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz CR25 NeoMag Coral Frag Rack

$42.00

Skimz CR25 NeoMag Coral Frag Rack is just what you need to cultivate and grow of hard and soft corals such as acropora, montipora, pocillopora, porites, zoas, etc.

Skimz CR25 Coral Frag Rack has an unique cross pattern for the holes along with an acrylic plug with a single rectangular post allowing you to rotate the plug in the hole in 90-degree increments. This allow you to choose the best placement of the coral frags. The cast acrylic structure of the rack attaches on glass or acrylic up to 12mm thick using strong neodymium magnets

Skimz Coral Frag Rack is available in four sizes: CR4, CR12, CR16 and CR25. It comes with free Frag Plugs.

Specifications

Holds 25 frag plugs
L375mm x D105mm

Dimensions (L x W x H): 38.00cm x 11.00cm x 6.50cm

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz CR16 NeoMag Coral Frag Rack

$32.00

Skimz CR16 NeoMag Coral Frag Rack is just what you need to cultivate and grow of hard and soft corals such as acropora, montipora, pocillopora, porites, zoas, etc.

Skimz CR16 Coral Frag Rack has an unique cross pattern for the holes along with an acrylic plug with a single rectangular post allowing you to rotate the plug in the hole in 90-degree increments. This allow you to choose the best placement of the coral frags. The cast acrylic structure of the rack attaches on glass or acrylic up to 12mm thick using strong neodymium magnets

Skimz Coral Frag Rack is available in four sizes: CR4, CR12, CR16 and CR25. It comes with free Frag Plugs.

Specifications

Holds 16 frag plugs
L250mm x D105mm

Dimensions (L x W x H): 25.00cm x 10.50cm x 7.30cm

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz CR12 NeoMag Coral Frag Rack

$25.00

Skimz CR12 NeoMag Coral Frag Rack is just what you need to cultivate and grow of hard and soft corals such as acropora, montipora, pocillopora, porites, zoas, etc.

Skimz CR12 Coral Frag Rack has an unique cross pattern for the holes along with an acrylic plug with a single rectangular post allowing you to rotate the plug in the hole in 90-degree increments. This allow you to choose the best placement of the coral frags. The cast acrylic structure of the rack attaches on glass or acrylic up to 12mm thick using strong neodymium magnets

Skimz Coral Frag Rack is available in four sizes: CR4, CR12, CR16 and CR25. It comes with free Frag Plugs.

Specifications

Holds 12 frag plugs
L170mm x D170mm

Dimensions (L x W x H): 23.00cm x 15.00cm x 6.50cm

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz CR4 NeoMag Coral Frag Rack

$12.00

Skimz CR4 NeoMag Coral Frag Rack is just what you need to cultivate and grow of hard and soft corals such as acropora, montipora, pocillopora, porites, zoas, etc.

Skimz CR4 Coral Frag Rack has an unique cross pattern for the holes along with an acrylic plug with a single rectangular post allowing you to rotate the plug in the hole in 90-degree increments. This allow you to choose the best placement of the coral frags. The cast acrylic structure of the rack attaches on glass or acrylic up to 12mm thick using strong neodymium magnets

Skimz Coral Frag Rack is available in four sizes: CR4, CR12, CR16 and CR25. It comes with free Frag Plugs.

Specifications

Holds 4 frag plugs
L95mm x D85mm

Dimensions (L x W x H): 10.50cm x 9.00cm x 6.50cm

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz SuperSilent SS18.0 Wavemaker Pump

$119.00

Skimz SuperSilent wavemaker pumps use high-quality 6 poles DC motors and Sine-Wave controllers which ensure efficiency and quiet operation. The controllers with "Wave Sync" function can be linked wirelessly to synchronise modes and up to 6 wavemakers can be linked.

SuperSilent SS18.0 has very small footprint and is a very efficient 18,000 L/h pump that draws only 40W at full flow. There are also one-touch 10 minute feeding mode, automatic self-cleaning system and photo-sensor night mode.

SuperSilent SS18.0 wavemaker pump has 6 different flow modes. You can adjust the modes with the frequency dial and speed button (See image).

SuperSilent Wavemaker Specifications:

Dimensions (L x W x H): 21.00cm x 16.00cm x 9.50cm

Wavemaker Dimensions
• L105 x D80 x H70mm (4 1/8" x 3 1/8" x 2 3/4")

Flow
• 18,000 L/h (4,755 gph)

Power Consumption
• up to 40W

Voltage
• AC100-240 50-60Hz 24V DC/2.75A

Pump Controller
• WMC-SS18.0

Magnet Mount (Glass thickness)
• up to 19mm (3/4")

For Aquarium
• up to 800 L (211 gal)

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz SuperSilent SS9.0 Wavemaker Pump

$99.00

Skimz SuperSilent wavemaker pumps use high-quality 6 poles DC motors and Sine-Wave controllers which ensure efficiency and quiet operation. The controllers with "Wave Sync" function can be linked wirelessly to synchronise modes and up to 6 wavemakers can be linked.

SuperSilent SS9.0 has very small footprint and is a very efficient 9,000 L/h pump that draws only 28W at full flow. There are also one-touch 10 minute feeding mode, automatic self-cleaning system and photo-sensor night mode.

SuperSilent SS9.0 wavemaker pump has 6 different flow modes. You can adjust the modes with the frequency dial and speed button (See image).

SuperSilent Wavemaker Specifications:

Dimensions (L x W x H): 21.00cm x 12.00cm x 8.50cm

Wavemaker Dimensions
• L90 x D70 x H60mm (3 9/16" x 2 3/4" x 2 3/8")

Flow
• 9,000 L/h (2,377 gph)

Power Consumption
• up to 28W

Voltage
• AC100-240 50-60Hz 24V DC/1.5A

Pump Controller
• WMC-SS9.0

Magnet Mount (Glass thickness)
• up to 15mm (9/16")

For Aquarium
• up to 300 L (79 gal)

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz SuperSilent SS6.0 Wavemaker Pump

$89.00

Skimz SuperSilent wavemaker pumps use high-quality 6 poles DC motors and Sine-Wave controllers which ensure efficiency and quiet operation. The controllers with "Wave Sync" function can be linked wirelessly to synchronise modes and up to 6 wavemakers can be linked.

SuperSilent SS6.0 has very small footprint and is a very efficient 6,000 L/h pump that draws only 18W at full flow. There are also one-touch 10 minute feeding mode, automatic self-cleaning system and photo-sensor night mode.

SuperSilent SS6.0 wavemaker pump has 6 different flow modes. You can adjust the modes with the frequency dial and speed button (See Image).

Dimensions (L x W x H):

21.00cm x 12.00cm x 8.50cm

SuperSilent Wavemaker Specifications:

Wavemaker Dimensions
• L75 x D60 x H50mm (2 15/16" x 2 3/8" x 1 15/16")

Flow
• 6,000 L/h (1,585 gph)

Power Consumption
• up to 18W

Voltage
• AC100-240 50-60Hz 24V DC/1A

Pump Controller
• WMC-SS6.0

Magnet Mount (Glass thickness)
• up to 12mm (1/2")

For Aquarium
• up to 200 L (53 gal)

View full product details »

Skimz RR117 Recirculating Biopellet Reactor

$241.00

Skimz RR177 Recirculating Biopellet Reactor has include a DC pump which give you full control of the flow rate through the reactor. QuietPro QP2.0 DC pump does double duty as a feed pump, pulled water into the reactor at the rate the effluent is allowed to exit while recirculating the water within the reactor chamber. The effluent can be fine tuned for your system according to the bio-load without overdoing it, and with a DC pump you can adjust the flow to keep the media tumbling and free of biofilm.

Skimz RR117 can also be used with other type of media, like phosphate media or activated carbon that needs to be tumbled.

Dimensions (L x W x H):

61.00cm x 20.50cm x 23.00cm

Calcium Reactor Features:

• Small Footprint
• An Integrated Feed
• Fully Adjustable Pump Flow
• Effluent can be Fine-Tuned
• Can be used with other type of Media

Reactor Specifications:
• Footprint: 155 x 155mm (6 1/8" x 6 1/8")
• Total height: 490mm (19 5/16")
• Body diameter: 110mm (4 5/16")

Pump Specifications:
• Model: QuietPro QP2.0 DC
• Power consumption: up to 22W
• Voltage: Power AC100-240 50-60Hz: 24V DC/1.5A
• Pump controller: QPC35

Media:
• Biopellet media: 1,200ml / Phosphate media: 1,000ml

Method of Feeding:
• Self-suction water intake

For Aquariums:
• up to 1,200L

Installation:
• Designed for in-sump use

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz QuietPro QP12.0 DC Submersible Water Pump

$230.00

Skimz QuietPro QP12.0 is a very efficient 12,000 L/h DC aquarium submersible water pump that draws only 88W at full flow.

QuietPro QP12.0 pump features a slow start-up mode with innovative electronics and automatic power-off protection mode. QuietPro is a variable speed controllable pump which offer high flow rate and low power consumption.

QuietPro QP12.0 is silent in operation due to brushless DC (BLDC) 6-pole synchronous motors. You can adjust the speed to meet your performance requirements, makes it an energy saving solution.

QuietPro Features:

Extremely Low Noise
10-Minute Feed Mode
Soft Start-Up
Dry Run Protection
Internal Memory Module
Overload/Temperature Protection
"High Strength" Ceramic Shaft
Fully Adjustable Flow

Pump Dimensions: L210 x D105 x H180mm (8 1/4" x 4 1/8" x 7 1/16")
Max Flow: 12,000L/h
Max Head: 5.8m
Power Consumption: up to 88W
Voltage: AC100-240 50-60Hz 24V DC/6A
Pump Controller: QPC110

Functions

Variable speed - range 5 – 100%
Soft startup - prevent excess wear on motor and impeller assembly
Shut-off blocks - automatic restart after 10 seconds (power off after 10 times)
Dry run - automatic restart after 2 minutes (power off after 10 times)
Memory module - in case of power failure, re-identification of the last set speed
Feed mode- disable pump for 10 minutes.
LED display - Wattage and speed settings

Safety

Overload protection
Liquid temperature - +2 °C to max. +40 °C
Ambient temperature - 0 °C to max. +50 °C
CE conformity

Skimz QuietPro QP DC pump has six different models. QP1.2, QP2.0, QP4.0, QP6.0, QP9.0, QP12.0

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz QuietPro QP9.0 DC Submersible Water Pump

$178.00

Skimz QuietPro QP9.0 is a very efficient 9,000 L/h DC aquarium submersible water pump that draws only 70W at full flow.

QuietPro QP9.0 pump features a slow start-up mode with innovative electronics and automatic power-off protection mode. QuietPro is a variable speed controllable pump which offer high flow rate and low power consumption.

QuietPro QP9.0 is silent in operation due to brushless DC (BLDC) 6-pole synchronous motors. You can adjust the speed to meet your performance requirements, makes it an energy saving solution.

QuietPro Features:

Extremely Low Noise
10-Minute Feed Mode
Soft Start-Up
Dry Run Protection
Internal Memory Module
Overload/Temperature Protection
"High Strength" Ceramic Shaft
Fully Adjustable Flow

Pump Dimensions: L210 x D105 x H180mm (8 1/4" x 4 1/8" x 7 1/16")

Max Flow: 9,000L/h
Max Head: 4.7m
Power Consumption: up to 70W
Voltage: AC100-240 50-60Hz 24V DC/4A
Pump Controller: QPC110

Functions

Variable speed - range 5 – 100%
Soft startup - prevent excess wear on motor and impeller assembly
Shut-off blocks - automatic restart after 10 seconds (power off after 10 times)
Dry run - automatic restart after 2 minutes (power off after 10 times)
Memory module - in case of power failure, re-identification of the last set speed
Feed mode- disable pump for 10 minutes.
LED display - Wattage and speed settings

Safety

Overload protection
Liquid temperature - +2 °C to max. +40 °C
Ambient temperature - 0 °C to max. +50 °C
CE conformity

Skimz QuietPro QP DC pump has six different models. QP1.2, QP2.0, QP4.0, QP6.0, QP9.0, QP12.0

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz QuietPro QP6.0 DC Submersible Water Pump

$146.00

Skimz QuietPro QP6.0 is a very efficient 6,000 L/h DC aquarium submersible water pump that draws only 47W at full flow.

QuietPro QP6.0 pump features a slow start-up mode with innovative electronics and automatic power-off protection mode. QuietPro is a variable speed controllable pump which offer high flow rate and low power consumption.

QuietPro QP6.0 is silent in operation due to brushless DC (BLDC) 6-pole synchronous motors. You can adjust the speed to meet your performance requirements, makes it an energy saving solution.

QuietPro Features:

Extremely Low Noise
10-Minute Feed Mode
Soft Start-Up
Dry Run Protection
Internal Memory Module
Overload/Temperature Protection
"High Strength" Ceramic Shaft
Fully Adjustable Flow

Pump Dimensions: L210 x D105 x H180mm (8 1/4" x 4 1/8" x 7 1/16")
Max Flow: 6,000L/h
Max Head: 4.0m
Power Consumption: up to 47W
Voltage: AC100-240 50-60Hz 24V DC/2.75A
Pump Controller: QPC55

Functions

Variable speed - range 5 – 100%
Soft startup - prevent excess wear on motor and impeller assembly
Shut-off blocks - automatic restart after 10 seconds (power off after 10 times)
Dry run - automatic restart after 2 minutes (power off after 10 times)
Memory module - in case of power failure, re-identification of the last set speed
Feed mode- disable pump for 10 minutes.
LED display - Wattage and speed settings

Safety

Overload protection
Liquid temperature - +2 °C to max. +40 °C
Ambient temperature - 0 °C to max. +50 °C
CE conformity

Skimz QuietPro QP DC pump has six different models. QP1.2, QP2.0, QP4.0, QP6.0, QP9.0, QP12.0

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz QuietPro QP2.0 DC Submersible Water Pump

$94.00

Skimz QuietPro QP2.0 is a very efficient 2,000 L/h DC aquarium submersible water pump that draws only 22W at full flow.

QuietPro QP2.0 pump features a slow start-up mode with innovative electronics and automatic power-off protection mode. QuietPro is a variable speed controllable pump which offer high flow rate and low power consumption.

QuietPro QP2.0 is silent in operation due to brushless DC (BLDC) 6-pole synchronous motors. You can adjust the speed to meet your performance requirements, makes it an energy saving solution.

QuietPro Features:

Extremely Low Noise
10-Minute Feed Mode
Soft Start-Up
Dry Run Protection
Internal Memory Module
Overload/Temperature Protection
"High Strength" Ceramic Shaft
Fully Adjustable Flow

Pump Dimensions: L130 x D70 x H110mm (5 1/8" x 2 3/4" x 4 5/16")
Max Flow: 2,000L/h
Max Head: 2.8m
Power Consumption: up to 22W
Voltage: AC100-240 50-60Hz 24V DC/1.5A
Pump Controller: QPC35

Functions

Variable speed - range 5 – 100%
Soft startup - prevent excess wear on motor and impeller assembly
Shut-off blocks - automatic restart after 10 seconds (power off after 10 times)
Dry run - automatic restart after 2 minutes (power off after 10 times)
Memory module - in case of power failure, re-identification of the last set speed
Feed mode- disable pump for 10 minutes.
LED display - Wattage and speed settings

Safety

Overload protection
Liquid temperature - +2 °C to max. +40 °C
Ambient temperature - 0 °C to max. +50 °C
CE conformity

Skimz QuietPro QP DC pump has six different models. QP1.2, QP2.0, QP4.0, QP6.0, QP9.0, QP12.0

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz QuietPro QP1.2 DC Submersible Water Pump

$73.00

Skimz QuietPro QP1.2 is a very efficient 1,200 L/h aquarium submersible water pump that draws only 15W at full flow.

QuietPro QP1.2 pump features a slow start-up mode with innovative electronics and automatic power-off protection mode. QuietPro is a variable speed controllable pump which offer high flow rate and low power consumption.

QuietPro QP1.2 is silent in operation due to brushless DC (BLDC) 6-pole synchronous motors. You can adjust the speed to meet your performance requirements, makes it an energy saving solution.

QuietPro Features:

Extremely Low Noise
0-Minute Feed Mode
Soft Start-Up
Dry Run Protection
Internal Memory Module
Overload/Temperature Protection
"High Strength" Ceramic Shaft
Fully Adjustable Flow

Pump Dimensions: L120 x D60 x H100mm (4 3/4" x 2 3/8" x 3 15/16")
Max Flow: 1,200L/h
Max Head: 1.8m
Power Consumption: up to 15W
Voltage: AC100-240 50-60Hz 24V DC/1A

Pump Controller: QPC35

Functions

Variable speed - range 5 – 100%
Soft startup - prevent excess wear on motor and impeller assembly
Shut-off blocks - automatic restart after 10 seconds (power off after 10 times)
Dry run - automatic restart after 2 minutes (power off after 10 times)
Memory module - in case of power failure, re-identification of the last set speed
Feed mode- disable pump for 10 minutes.
LED display - Wattage and speed settings

Safety

Overload protection
Liquid temperature - +2 °C to max. +40 °C
Ambient temperature - 0 °C to max. +50 °C
CE conformity

Skimz QuietPro QP DC pump has six different models. QP1.2, QP2.0, QP4.0, QP6.0, QP9.0, QP12.0

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz RR97 Recirculating Biopellet Reactor

$220.00

Skimz RR97 Recirculating Biopellet Reactor has included a DC pump which give you full control of the flow rate through the reactor. QuietPro QP1.2 DC pump does double duty as a feed pump, pulled water into the reactor at the rate the effluent is allowed to exit while recirculating the water within the reactor chamber. The effluent can be fine tuned for your system according to the bio-load without overdoing it, and with a DC pump you can adjust the flow to keep the media tumbling and free of biofilm.

Skimz RR97 can also be used with other type of media, like phosphate media or activated carbon that needs to be tumbled.

Dimensions (L x W x H):

61.00cm x 18.50cm x 20.00cm

Calcium Reactor Features:

• Small Footprint
• An Integrated Feed
• Fully Adjustable Pump Flow
• Effluent can be Fine-Tuned
• Can be used with other type of Media

Reactor Specifications:
• Footprint: 115 x 115mm (4 1/2" x 4 1/2")
• Total height: 490mm (19 5/16")
• Body diameter: 90mm (3 9/16")

Pump Specifications:
• Model: QuietPro QP1.2 DC
• Power consumption: up to 15W
• Voltage: AC100-240 50-60Hz 24V DC/1A
• Pump controller: QPC35

Media:
• Biopellet media: 700ml / Phosphate media: 600ml

Method of Feeding:
• Self-suction water intake

For Aquariums:
• up to 700L

Installation:
• Designed for in-sump use

Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1 weeks.

View full product details »

Skimz Recirculating Biopellet Reactor RR157DC

$304.00

Skimz RR157DC Recirculating Biopellet Reactor featured with self-priming and does not require feed pump as it feeds itself via a specially designed inlet.
This Recirculating Reactor is powered by DC pump which mean lower power consumption, more efficiency, less heat and calcium buildup in the pump.
The pump in the Reactor also features six preset settings to dial in your reactor to the right level without compromising pressure.

Skimz RR157DC can also be used with phosphate media or activated carbon. When using it as Fluidized Reactor, insert the provided sponge at bottom and top of the reacting chamber.

Technical Data:

Reactor pump: Skimz QP4.0

Power consumption: 25W

Biopellet media: 2,000ml / Phosphate media: 1,800ml

Method of feeding: Self-suction water intake

Dimension:

L 180 x W 180 x H 510mm

Reactor body diameter (mm): 150

For Aquariums: Up to 2,000 litres

Installation: Designed for in-sump use

View full product details »

Panda Oranda Goldfish (Carassius auratus)

$12.00

Panda Oranda Goldfish (Carassius auratus)

An oranda is a breed of goldfish characterized by a prominent bubble-like "hood" on the head. The headgrowth or hood may be a prominent growth on the top of the head or may encase the whole head except for the eyes and mouth.

Size: approx 2-3"

* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.

View full product details »

Skimz ELS-S304 Nylon Filter Sock

$6.50

Skimz Xtend-Life 100% nylon filter sock is designed to provide long service life, capturing a large amount of particles thus giving the water a clean, almost sparkling look.

Skimz ELS-S304 Filter Sock can hold up to twice the amount of dirt as a traditional felt bag to reducing waste and bag changes. The porous material allows water to pass through freely, but traps particles and blocks large objects from entering the sump tank.

Skimz ELS-S304 Filter Sock is made of washable nylon which is easy to clean and reusable.

Features:
Longer service life
Fewer change-outs
Washable

Material: 300-micron fine mesh nylon

Sizes:
Skimz ELS-S304 - 240mm Short (4” x 9.45”)
Skimz ELS-L304 - 355mm Long (4” x 14”)
Use of the Skimz Xtend-Life filter sock will prolong the life of pump and reduce its cleaning and maintenance requirements.

Skimz Xtend-Life filter sock available in two sizes: ELS-S304 and ELS-L304

View full product details »