- Model: CR100 WP
- Pump : WP1000
- Power : 220V/110V ,20W
- Internal volume : 1L-1.5L
- Size: 135*205*445MM
- Capacity :200L aquarium
Reactors
- Biopellet reactors
- Calcium reactors
- Fluidised reactors
- etc.
AF 110 MEDIA REACTOR
$198.00
A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.Diameter pipe: 110mm
Height: 39cm
Connections: 20mm
Accommodates up to: 3L (6.34 US pt)
The width of the cylinder: 15cm
AF 150 MEDIA REACTOR
$315.00
A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.Diameter pipe: 150mm
Height: 45cm
Connections: 20mm
Accommodates up to: 7.2L (1.91 US gal)
The width of the cylinder: 19cm
AF 90 MEDIA REACTOR
$140.00
A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.Tube Diameter: Diameter pipe: 90mmHeight: 30cm
Connections: 16mm
Accommodates up to: 1.6L
The width of the cylinder: 13cm
Bubble Magus BP100 Biopellet Reactor
$130.00
Biopellet Reactor
- Model : BP100
- Pump : WP600
- Power : 220V/110V ,11W
- Internal volume : 1.5L
- Size :146*179*450mm
Bubble Magus BP130 Biopellet Reactor
$145.00
Biopellet Reactor
- Model : BP130
- Pump : WP1000
- Power : 220V/110V ,20W
- Internal volume : 1L-2L
- Size :176*220*500mm
Bubble Magus Calcium Reactor CR100WP
$240.00
Bubble Magus Calcium Reactor CR120WP
$260.00
- Model: CR120 WP
- Pump : WP1000
- Power : 220V/110V ,20W
- Internal volume : 1L-2L
- Size: 160*238*500MM
- Capacity :200L -400L aquarium
Bubble Magus Calcium Reactor CR150WP
$280.00
- Model: CR150 WP
- Pump : WP2000
- Power : 220V/110V ,40W
- Internal volume : 3.5L
- Size: 200*282*495MM
- Capacity :400L-800L aquarium
Bubble Magus Calcium Reactor CR200WP
$320.00
Bubble Magus Calcium Reactor CR200WP- Model: CR200 WP
- Pump : WP2000
- Power : 110V ,40W
- Internal volume : 6L
- Size: 9.06 in x 12.29 in x 21.46 in, 230*312*545MM
- Capacity : 200 - 400 gallons, 800L -1500L aquarium
Bubble Magus Mini 80 Filters
$100.00
- Model : MINI 80
- Pump : WP600
- Power : 220V/110V ,8.5W
- Internal volume : 500ML
- Two version for use ,with sponge or without sponge.
Bubble Magus Zeovit Reactor ZF150
$150.00 $170.00
Reactor zeolite for aquariums marine and reef with curved blades.
- Pump: ROCK WP1000
- Pump power: 20 W, 220 V
- For aquariums from 500 to 1500 LT
- Chamber diameter: 153 mm
- Height: 420mm
- How to Use: in sump
- Product Dimensions: 160x160x420 mm
DELTEC CR TWINTECH
$2,150.00
Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1-2 weeks.
DELTEC FLUIDISED REACTOR FR512
$528.00
Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1-2 weeks.
DELTEC INTERNAL SKIMMER SC3070
$3,600.00
In Sump Version - Deltec SC 3070 - This stands for Single Chamber, body diameter 300mm and total height 700mm
The total height measurement includes around 20mm for cup removal
Significantly exceeds performance of AP1004 (2400L of air - 230V)
Footprint: 320mm x 320mm
Footprint plus pipework: 383 mm x 325 mm
Total air produced: 2x1500 to 2x1600 lts/hour
Power consumption: 2 x 29W-31W
Working water height in sump: 180-260mm
Neck diameter: 160mm
Outlet pipe size: 50mm
Tank Suitability: 4000L for heavy stocking and 4800L for normal stocking
Remote drain of skimmer cup
Air silencers
Micro adjustable skimmer setting
High water flow through the skimmer
Optional self cleaning system
New colour scheme
No feed pump required, skimmer draws water directly from the sump
Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1-2 weeks.
FAUNA MARIN SKIM BREEZE REACTOR SET
$120.00
Fauna Marin Skim Breeze Reactor is a special air filter used for connecting to the air inlet of a protein skimmer for air purification and CO2 reduction. Skim Breeze Reaktor Set 1 Liter is perfect for aquariums up to 750 L.
Size Skim Breeze Reaktor :
height: 29 cm
Base plate: 9,5-10 cm diameter
How to use
To fill the filter, loosen the screw slightly, insert the appropriate hose adapter for the protein skimmer and close the filter cover.
Usage of the Skim Breeze granulate
Do not submerge or expose the granules to water. Do not inhale dust, use gloves, and eye protection when filling reactor with Skim Breeze granulate.
Please observe the dosage instructions of the Skim Breeze granulate.
***
Fauna Marin Skim Breeze is a special adsorbing granule used for purifying the air pulled-in by protein skimmers.
Through skimmer air purification, your aquarium’s pH value will increase and become more stable. By reducing nutrients, algae growth is significantly reduced and coral growth is increased. Our high performance adsorbent prevents harmful gases such as cigarette smoke and CO2 from being introduced via the skimmer.
Capacity
1000 ml of Skim Breeze per 500 liters (132 US gal) of aquarium volume will last about 4-6 weeks.
Skim Breeze granulate must be replaced when granulate turns completely violet.
A refolding of the used material does not mean it can be used again.
Dosing instructions
Place Skim Breeze granules into a dry filter and connect the filter to skimmer air inlet.
Safety instructions
Do not inhale the granulate, do not inhale dust, use gloves. Keep container tightly closed and protected from direct sunlight.
Skim Breeze granules must be carefully handled at all times. Keep out of the reach of children. Read label before use.
Caution:
Irritant causes severe skin burns and severe eye damage. Protect product from sun exposure and moisture.
H315 H318, P302 / P352, P332 / 313, P305 / 351/338, P280
Ingredients
Calcium hydroxide (EC 215-137-3), sodium hydroxide (EC 215-283-8), zeolites (EC 215-283-8)
NYOS TORQ® BODY
$115.00
The Nyos® TORQ® is an innovative high performance system reactor in a modular design for all types of filter media, such as active carbon, phosphate remover, zeolite and bio pellets.
The problem
Filter media, are an essential part of maintaining good water quality in an aquarium. They help remove excess pollutants and raise water quality. Often media are simply placed in filter bags, this leads to channeling where all the media does not come into contact with the water. Leaving its full capacity unused.
The solution
Nyos® has developed the innovative TORQ® system reactor as a simple and elegant solution to the problem of aquarium filtration. The TORQ® produces an even water flow throughout the chamber giving ideal conditions for any choice of filter media.
The advantages
Modular: The Nyos® TORQ® is an innovative system reactor for all types of filter media. The TORQ® Dock is equipped with an integrated pump and constitutes the base unit. The Dock is equipped with a universal connector, which allows TORQ® reactor bodies of all available sizes to be inserted.
Frustration-free: With the Nyos® TORQ®, we have deliberately avoided screws, hoses and valves. Allowing, filter media to be changed in seconds with ease and free of frustration.
Controllable: By turning the cap it is possible to seamlessly adjust and precisely control the flow with a hand, without reaching into the water. The sophisticated controllability means the flow speed can be optimally set to the type and amount needed by the respective filter medium.
High capacity: The pump in the TORQ® Dock has a high maximum flow rate of up to 1.000 l/h (264 gph). Allowing filter media to be optimally utilised and preventing channelling and inefficient use.
Two-in-one: One reactor, two media – In the TORQ® bodies 1.0 and 2.0, it is possible to use two different filter media at the same time by inserting a chamber separator.
Plug-and-play: The required pump is already included in the TORQ® Dock. Simply place the body with the medium on the Dock and insert. Done.
Specifications TORQ Body 0.75
Volume: 750ml (25 fl oz)
Usage of two filter media: No
Volume with chamber separator: -
Diameter: 70mm (2.75 in)
Filter foams included: Yes
Height incl. Dock: 47cm (18.5 in)
Specifications TORQ Body 1.0
Volume: 1000ml (34 fl oz)
Usage of two filter media: Yes
Volume with chamber separator: 500ml + 500ml (17 fl oz + 17 fl oz)
Diameter: 70mm (2.75 in)
Filter foams included: Yes
Height incl. Dock: 53cm (21 in)
Specifications TORQ Body 2.0
Volume: 2000ml (68 fl oz)
Usage of two filter media: Yes
Volume with chamber separator: 1000ml + 1000ml (34 fl oz + 34 fl oz)
Diameter: 100mm (4 in)
Filter foams included: Yes
Height incl. Dock: 53cm (81 in)
NYOS TORQ® DOCK
$139.00
The Nyos® TORQ® is an innovative high performance system reactor in a modular design for all types of filter media, such as active carbon, phosphate remover, zeolite and bio pellets.
The problem
Filter media, are an essential part of maintaining good water quality in an aquarium. They help remove excess pollutants and raise water quality. Often media are simply placed in filter bags, this leads to channeling where all the media does not come into contact with the water. Leaving its full capacity unused.
The solution
Nyos® has developed the innovative TORQ® system reactor as a simple and elegant solution to the problem of aquarium filtration. The TORQ® produces an even water flow throughout the chamber giving ideal conditions for any choice of filter media.
The advantages
Modular: The Nyos® TORQ® is an innovative system reactor for all types of filter media. The TORQ® Dock is equipped with an integrated pump and constitutes the base unit. The Dock is equipped with a universal connector, which allows TORQ® reactor bodies of all available sizes to be inserted.
Frustration-free: With the Nyos® TORQ®, we have deliberately avoided screws, hoses and valves. Allowing, filter media to be changed in seconds with ease and free of frustration.
Controllable: By turning the cap it is possible to seamlessly adjust and precisely control the flow with a hand, without reaching into the water. The sophisticated controllability means the flow speed can be optimally set to the type and amount needed by the respective filter medium.
High capacity: The pump in the TORQ® Dock has a high maximum flow rate of up to 1.000 l/h (264 gph). Allowing filter media to be optimally utilised and preventing channelling and inefficient use.
Two-in-one: One reactor, two media – In the TORQ® bodies 1.0 and 2.0, it is possible to use two different filter media at the same time by inserting a chamber separator.
Plug-and-play: The required pump is already included in the TORQ® Dock. Simply place the body with the medium on the Dock and insert. Done.
-
DIMENSIONS DOCK (LXWXH)
162x162x110mm (6.4×6.4×4.3 in) -
FLOW MAX.
1.000 l/h (264 gph) -
WATTAGE
12W -
SILICONE FEET
Yes
Reef Octopus CALCIUM REACTOR with VarioS pump
$743.00
Features & Benefits- Reverse flow and CO2 Recirculating Design
- Built-in bubble counter for monitoring of CO₂ flow rate/drip rate?
- Probe holder with plug*
- Easy-to-remove lid – change to: Easy maintenance
- Removal lid for easy maintenance
- Precision effluent control valve
- High quality handmade solid cast acrylic construction
- Controllable and variable speed DC pump for energy-efficient and silent operations
- 2 years warranty**
- * Does not include PH probe.
Overview
An ideal solution/upgrade for the discerning hobbyist
OCTO CalReact features high-quality cast acrylic body construction, a PH probe holder to allow constant monitoring of water alkalinity (PH level) with the use of a PH probe (sold separately), a built-in bubble counter for CO₂ flow rate calculation, reverse water flow for CO₂ recirculation to maximise contact time with the coral media which produces CO2.
Powered by our VarioS DC pump which features a pinwheel impeller, a detachable controller, high quality ceramic shaft and bearing to reduce wear and tear, and the latest variable speed flow technology for refined control, enhanced performance, energy-efficiency and safer operations.
Unlike the vast majority of circulation pumps which uses alternating current (AC), our VarioS pump boasts several key advantages over traditional AC pumps, namely, higher energy efficiency, safer operations at a working voltage of 24V and most notably, the variable speed control to adjust the ideal mix of air and water flow into the skimmer.
Note: This is not a pressure-rated pump. This pump is not for second floor applications or to feed Beckett or downdraft skimmers where constant pressure is required.
How it works
A calcium reactor is essentially a chamber full of Aragonite which is natural form of carbonate mineral, or commonly known as crushed hard corals. Aquarium water is circulated through this chamber along with carbon dioxide (CO2). The CO2 lowers the pH in the chamber to an acidic level which dissolves the carbonate minerals into the aquarium water. In addition to dissolving the carbonate minerals, this process also dissolves nearly all the minerals and trace elements the coral needed in order to grow.
Automated Calcium and Alkalinity supplementation – When set up properly with external controller and probe. These perimeters can be pre-set with very little monitoring and maintenance.
Available in 3 models – CalReact 140, CalReact 200 and CalReact 220.
Warranty**
– 2 years for pump motor only
– 1 year on reactor body
Technical Data:
Reactor:
Circulation Pump:
Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1-2 weeks.
Reef Octopus CLASSIC CALCIUM REACTOR with AQ pump
$415.00
Features & Benefits- Reverse flow CO2 recirculating design
- Probe holder with Plug
- Built in Bubble Counter
- Easy to Remove Lid
- Solid Acrylic construction
- Complete with Pump
Overview
An ideal solution/upgrade for the discerning hobbyist
Quality, design and affordability define the Reef Octopus Classic Calcium Reactor series. Available in 2 different models that feature reverse flow water current for maximum water and C02contact time with coral media.
All models come with PH probe holders to monitor Ph levels in the main reactor chamber and built in bubble counters to monitor Co2 drip rates. To help you meet the challenging task of maintaining alkalinity, calcium and trace elements, consider adding a Reef Octopus calcium reactor to your aquarium system.
Technical Data:
Skimmer:
Circulation pump:
Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1-2 weeks.
Reef Octopus General Bio-Pellets Reactor
$210.00
BR-MF-70
Diameter - Ø70
Capacity - 300ml
Footprint - 140x140mm
Height - 490mm
BR-MF-110
Diameter - Ø110
Capacity - 700ml
Footprint - 170x170mm
Height - 530mm
BR-MF-140
Diameter - Ø140
Capacity - 2000ml
Footprint - 210x210mm
Height - 530mm
Reef Octopus Hang On External Bio Churn Reactor
$379.00
For tanks up to 400L, maximum flow rate 880L/H, maximum head height 0.8m.
Features & Benefits
- Equipped with Feed Pump
- Hanging Bracket
- Churn Style Fluidization
- Hose Barb Output Fittings
- Easy to Maintain Upper Containment Plate
- Solid Acrylic Construction
Overview
Our Bio Churn reactors are for those that demand the ultimate control over your Bio pellets solid carbon dosing. The superior “Churn” Style” design easily fluidizes large amounts of bio pellet media without blasting it with outrageous flow just to fluidize the media, which is a commonly found on other Bio Pellet reactors in the market today.
The unique motion these innovative reactors produce allow for much greater suspension of the media in a cyclone “churn” style motion created with our patent pending churn plate. Equipped with our very own Aquatrance recirculation pumps which features independent flow valves, so the user can independently control the flow of media within the reactor.
Our Bio Churn Reactors come in four Series including the in-sump, External/Recirculating and the Commercial line. For the ultimate control of PO4 & NO3 look no further than the Bio Churn.
Technical Data:
Reactor
Circulation Pump:
Reef Octopus Internal Bio Churn Reactor
$272.00
Features & Benefits- Equipped with Feed Pump
- Churn Style Fluidization
- Cascading Output
- Easy to Maintain Upper Containment Plate
- Solid Acrylic Construction
Overview
Our Bio Churn reactors are for those that demand the ultimate control over your Bio pellets solid carbon dosing. The superior “Churn” Style” design easily fluidizes large amounts of bio pellet media without blasting it with outrageous flow just to fluidize the media, which is a commonly found on other Bio Pellet reactors in the market today.
The unique motion these innovative reactors produce allow for much greater suspension of the media in a cyclone “churn” style motion created with our patent pending churn plate. Equipped with our very own Aquatrance recirculation pumps which features independent flow valves, so the user can independently control the flow of media within the reactor.
Our Bio Churn Reactors come in four Series including the in-sump, External/Recirculating and the Commercial line. For the ultimate control of PO4 & NO3 look no further than the Bio Churn.
Technical Data:
Reactor:
Circulation Pump:
Note: This Product is for Online Pre-Order Basis Only. Usual Lead Time is approximately 1-2 weeks.
Reef Octopus Kalk Stirrer Reactor
$374.00
Features & Benefits
GENTLY MIXES YOUR CALCIUM HYDROXIDE
Kalk Stirrer (Nilsen Reactor) carries a high torque, low RPM and low voltage motor, that not only gently mixes your calcium hydroxide (kalkwasser), it is also one of the quietest in the market.
This method is not only ideal but is also the safest way of introducing the freshest kalkwasser to a reef system. Our Kalk Stirrer is designed to keep the undissolved particles at the bottom of the reactor chamber while always leaving the clear, highly saturated kalkwasser liquid at the top. Adding kalk powder is easy with just a few twists of the large thumb screws releasing the seal-tight lid for quick and easy refills.
NO NEED FOR PESKY POWERHEADS
With the built in Power Head, matched to the exact specification of our Kalkwasser Reactor, there is no need for frequent cleaning, and no more risky dosing with large vats of lime water which take up valuable space. There is no need for premixing or worry about clogging when using our innovative and efficient Kalk Stirrer (Nilsen Reactor) which are extremely easy to use and salt-water safe, making them simply the most economical and best kalk reactor in the market.
* Please do not run the Kalk Stirrer unit continuously.
Technical Data:
Reef Octopus Light Reactor
$474.00
NATURAL FILTRATION
The Reef Octopus Light Reactor is a natural filter which utilizes macroalgae like Chaetomorpha to absorb and remove algae-producing nutrients from your aquarium's water. As macro algae grows, it will consume nutrients in the water. Once you harvest the macro algae, the nutrients are then removed from your system.
Besides being a all natural approach to filtration, Algae reactors also provide a safe haven for copepods and Anphipods.
The Reef Octopus Light Reactor's unique triangular waterproof LED light (IP67 Certified) strip inside the reactor maximizes light exposure for the algae with 360 degree coverage, aiding growth and nutrient consumption. The close proximity of the high-output LED strip gets as much light to the macro algae as possible and quickly grows the macro algae.
Features & Benefit
- A unique and safe method of natural filtration
- Greatly helps remove algae-producing nutrients from water naturally
- Perfectly balance of light spectrum for optimal Chaetomorpha growth
- Perfect safe haven for copepods and amphipods to reproduce and naturally feed the aquarium
- Unique Triangular LED Strip for 360 degrees coverage
- Inner LEDs provide safe high quality lighting
- Stabilizes pH and and lowers dissolved CO2 levels
- Low wattage and safe operation with heat sink
- Integrated algae containment plates
- Removable 3 tiers strainer container for easy harvesting
- Strainer Flip Stand – for easy maintenance
- Adjustable light intensity
Overview
Our LR Reactors are made with the most robust material to ensure that they adhere above the industry standards of keeping in shape and watertight. With our unique Triangular LEDs placement eradicating blind spots couple with optimum spectrum guarantees a quicker growth rate.
Harvest timeline can be easily controlled via the adjustable light intensifier should you wish to slow down the growth rate. Bundled with a 3 Tiers Strainer Basket to make harvesting a breeze.
Available in 2 models – LR-150, LR-200
Warranty (against manufacturing defect):
2 years* – pump motor only
1 year – all other parts
Technical Data
| Item No. | Product | Wet/Dry | Diameter | Footprint | Height | Tank Volume | Power（w） | ||||||
| mm | inch | mm | inch | mm | inch | L | US Gal | Lights | |||||
| 130309 | LR-150 | Both | 150 | 5.9 | 230 | 205 | 9.1 | 8.1 | 510 | 20.1 | 200-600 | 52-158 | 18 |
| 130310 | LR-200 | Both | 200 | 7.9 | 285 | 265 | 11.2 | 10.4 | 510 | 20.1 | 500-1000 | 132-264 | 18 |
Circulation Pump
| Product | Model No. | Wet/Dry | Power | Max Head Height | Maximum Flow Rate | |||||||
| 50Hz | 60Hz | 50Hz | 60Hz | 50Hz | 60Hz | |||||||
| W | W | m | Ft. | m | Ft. | LPH | GPH | LPH | GPH | |||
| LR-150 | AQ-1200 | Both | 10 | 15 | 1.1 | 3.6 | 1.3 | 4.3 | 1300 | 343 | 1287 | 340 |
| LR-200 | AQ-2000 | Both | 42 | 45 | 2.0 | 6.5 | 2.1 | 6.9 | 2000 | 528 | 2203 | 582 |
Electrical or other Certification
Pumps (AQ) – CE & PSE certified
Lights – CE certified
© 2020 Fresh N Marine. All rights reserved.
X