Light Fixtures & Accessories
Aquanice LED 1200 (120cm 48w)
$110.00
Aquanice LED 1200 (120cm 48w)
2 mode switches
Aqua Illumination HMS HANGING KIT - HYDRA SUSPENSION
$69.00
HMS Hanging Kit lets you elegantly suspend one or multiple Hydras over your aquarium tank, and adjust the height to achieve desirable illumination and avoid shadow or glare
Aqua Illumination HMS H52 BRACKET FOR HYDRA FIFTYTWO
$19.00
The bracket holds one Hydra FiftyTwo LED. A HMS Multi Light Track System is required for the bracket.
Aqua Illumination HMS TRACKS (VARIOUS LENGTHS)
$88.00
The HMS tracks are great for multiple Hydra lights setup, keeping them all at the same height, saving space and freely orientate the LED right where you want.
Aqua Illumination HMS H26 BRACKET FOR HYDRA TWENTYSIX
$19.00
The bracket holds one Hydra TwentySix LED. A HMS Multi Light Track System is required for the bracket.
Aqua Illumination HMS DOUBLE ARM KIT
$145.00
HMS Double Arm Kit is a great for mounting multiple lights on one rail across your tank. Clean, simplistic aquarium lighting setup.
Ecotech Radion Diffuser XR30
$89.00
Upgrade your Ecotech Marine Radion XR30 Light!
- Increased blending
- Decreased shadows
- Decreased color separation
- Installs in minutes
- Compatible with all XR30 Radion Lights
Even Spread & Coloration
Once you put the XR30 Diffuser on your Ecotech Radion LED light you will instantly see a better balance of light throughout your aquarium. PAR tests have proven that even though the overall peak PAR numbers will decrease, the lower light areas will actually receive more light from a diffused source. The overall light loss is around 20%, and since a majority of us do not use even 80% of the available lighting output, the PAR loss can be combatted by increasing the overall power delivered to the LEDs.
Increased Spectrum Blending
Diffusing LED lights greatly helps blend the overall spectrum into one cohesive light source. Traditionally aquarium LEDs have used optics to increase the penetration of the light, but doing so actually makes each LED into its own little spotlight, making it harder for colors to blend. With the overall amount of light available in modern reef tank LEDs, more power is not exactly the best thing, and throughout our testing, we have found that evenly spread light that is blended properly is more important for coral health and growth.
Decreased Shimmer
LED lights are known for producing a lot of shimmer, also known as the "disco-ball effect" and the Ecotech Radion Diffuser directly attacks this problem head-on. With the overall goal being to mimic the natural sunlight or metal halide shimmer effects, the XR30 Diffuser is not perfect, but it gets much closer than almost any LED available today.
Installation only takes a few minutes, and by unscrewing the bottom plate with a Phillips screwdriver, you can then attach the mounting adapter plate. The diffuser lens will then magnetically attach to the adapter plate. The magnetic attachment makes the diffuser lens very easy to clean
Specifications:
Dimensions - 11.75" x 7" x 0.625"
Ecotech Radion Diffuser for XR15
$65.00
XR15 Diffuser for Radion LED Light - EcoTech Marine
Carefully designed to maximize color mixing and caustic softening while maintaining the sleek look of your XR15 Radion fixture.
- Advanced color mixing
- Reduced light spillage
- Minimal reduction in PAR
- Easy to install
- East to remove and clean
- Compatible with all generations of XR15 Radions.
Radion diffusers install in minutes reusing the same screws used in the lights. The lens is magnetically attached for easy removal and cleaning.
A diffuser augments the color mixing provided by the reflector, TIR or HEI lenses that are installed on the XR15 Radions
At only 5/8ths of an inch thick (15.875 mm), the Radion diffuser accessory incorporates performance and aesthetic design to maintain the sleek look of your aquarium lighting.
Maxspect Commercial LED FloodLight F300
$3,150.00
Maxspect Commercial LED FloodLight F300- Power: 300 watts
- Equivalent to 1KW Metal Halide
- 2 year warranty
- Custom colour temperature
- Advanced heat sink with thermal tubes for maximizing heat dissipation capacity
- IP Code: IP65 Waterproof
- 1-2 LED channels, individually adjustable
- Wi-Fi controls
Maxspect has developed these commercial floodlights to be the No. 1 choice for public aquarium curators, the units are manufactured to the highest standard for this sector using the best quality U.S. made Cree™ LED chips only. The difference with a Maxspect commercial product to any other is that the curator can select the color temperature that they require for a particular display, for example, a freshwater system running with 8000K color temperature or a coral display with a 14000K color temperature. We can also manufacture the color spectrum specifically to suit your display requirements.
Maxspect offers a wide range of commercial LED floodlights, designed specifically for use in public aquariums, shopping malls, warehouses, museums, coral farms and other similar facilities - and with an IP65 rating (IP67 also available upon request).
Maxspect commercial floodlights have special reflective material inside similar to metal halide fixtures, this reflects the light from the LED creating a better
blend of the different colors housed within the unit, it also radiates light more efficiently from the fixture and giving better coverage.
The Maxspect commercial floodlights come with four different power options: F150, F300, F500 and F1000. These are aimed at different
sizes and depths of aquarium, as an example the largest F1000 unit can light down to depth in excess of 11m.
For the aquarium that wants a unique experience for their visitors, we are able to offer wireless link up of commercial floodlights and controlled by iOS/Android devices, this will enable the aquarium to simulate different weather conditions over large displays such as cloud cover or sunrise/sunset for the ultimate visual experience.
Our research and development team are actively working with public aquariums to develop new products that will enhance the appearance of displays and take visitor experience to the next level.
Maxspect ICV6 Controller
$88.00
The ICV6 controller, simple and powerful, allows connecting and controlling with the Maxspect SYNA-G App, via a smartphone or tablet, the new and future Maxspect products.
Only an ICV6 controller is required for connecting to all Maxspect products.
Whether for LED lights: ETHEREAL, RECURVE, RSX; TURBINE DUO pumps or GYRE pumps. This unique ICV6 controller will thus avoid any interference problems between your different devices while having a simple and practical installation.
Once in possession of the ICV6 controller, simply download the Maxspect SYNA-G app, for Android or iOS, on your smartphone or tablet, to control and program your Maxspect LED light and pumps.
ANS HydroBar 'C' Hanging Bar
$80.00
ANS HydroBar C
Hanging Bar for lamp
Elegant style
Stainless steel fixture
withstand heavy load
Sit on glass tank
Adjustable length
Detachable for easy transport
| Model | Name | Dimensions LxWxH(cm) | For Tank Size |
| 22050 | HydroBar C60 | 60x37x4.5 | 60cm/2ft |
| 22051 | HydroBar C90 | 90x37x4.5 | 90cm/3ft |
| 22052 | HydroBar C120 | 120x50x4.5 | 120cm/4ft |
ANS HydroBar 'S' Hanging Bar Single
$90.00
ANS HydroBar S
Hanging Bar for lamp
Elegant style
Stainless steel fixture
withstand heavy load
Fix to back of cabinet
Adjustable length
Detachable for easy transport
2ft tank (1set), 4ft tank (2set)
| Model | Name | Dimensions LxWxH(cm) | For Tank Size |
| 22060 | HydroBar S | 60cm/2ft |
ANS HydroBar 'M' Hanging Bar
$110.00
Hanging Bar for lamp
Elegant style
Stainless steel fixture
withstand heavy load
Fix to back of cabinet
Adjustable length
Detachable for easy transport
| Model | Name | Dimensions LxWxH(cm) | For Tank Size |
| 22061 | HydroBar M60 | 60x62x40 | 60cm/2ft |
| 22062 | HydroBar M90 | 90x92x40 | 90cm/3ft |
| 22063 | HydroBar M100 | 100x92x40 | 100cm/3.5ft |
| 22064 | HydroBar M120 | 120x122x40 | 120cm/4ft |
| 22065 | HydroBar M150 | 150x152x40 | 150cm/5ft |
| 22066 | HydroBar M180 | 180x152x40 | 180cm/6ft |
Ecotech ReefLink
$239.00
WHAT IS THE REEFLINK?
ReefLink provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.
ReefLink enables a continuous real-time connection with EcoTech equipment via ecosmartlive.com. Control EcoTech reef aquarium equipment from your computer or tablet — anywhere, any time.
ReefLink is easy to set up. Just place the ReefLink anywhere within range of your WiFi router, and power it on. Then forget about it. No wires. No adapters. No worries.
“Set up was extremely simple.
No buttons. No dials. Nothing
to manually interact with.
Its simplicity is a very good thing.”
Advanced Aquarist, “ReefLink Hands-on Preview“
Here’s how it works: ReefLink Bridges EcoTech equipment to EcoSmart Live using RF and WIFI
Computers, Mobile Devices
Control your aquarium any time, anywhere
EcoSmart Live
EcoTech’s powerful, cloud-based control platform
Router
ReefLink connects wirelessly to any home router
ReefLink
The wireless bridge between your equipment and EcoSmart Live
Radion Lights, VorTech and Vectra Pumps
Control equipment without wires or adapters
REEFLINK FEATURES & SPECIFICATIONS
FEATURES
- Goodbye wires: Wirelessly control any EcoSmart-enabled EcoTech product (Radions, VorTechs)
- Multiple tanks: Control the equipment on one or more tanks with one ReefLink
- WiFi built in: ReefLink uses WiFi to communicate with your router
- RF built in: ReefLink uses RF (radio frequency) to communicate with your EcoTech products — no dongles or adapters required
- Direct connect option: If WiFi is not available, connect the ReefLink using an Ethernet cable
- Connection indicator: An LED ring informs you of the status of your ReefLink connection
TECHNICAL SPECIFICATIONS
- Input 110-240 V (50/60hz)
- Ethernet 10/100 mb
- WiFi 802.11n
- USBa
SYSTEM SPECIFICATIONS
- Windows XP or later, or OSX 10.6 or later
- Java SE 6 or later
- Websocket-capable browsers such as Chrome, Firefox or Safari
ECOSMART LIVE: THE FUTURE OF REEF AQUARIUMS
No matter where life takes you, with EcoSmart Live, your tank is right there with you. EcoSmart Live enables you to control EcoTech Products from anywhere, any time using a compatible web browser or our dedicated Apple iOS and Android apps.
Enjoy the peace of mind that your reef and its inhabitants are cared for and safe. EcoSmart Live is a cloud-based app, so you can access it through a web browser on any computer or tablet with an Internet connection. And you can say goodbye to installing software or staying on top of updates — new features are installed automatically.
But that’s just the start. All new equipment from EcoTech Marine will be integrated with EcoSmart Live out of the box — so your tank will always be future-proof.
THE BEST JUST GOT BETTER
The award-winning Radion LED lighting systems and VorTech pumps get even better when paired with a ReefLink and EcoSmart Live. Now you have total remote access to your Radions and VorTechs no matter where you are — through a computer, iPad or iPhone, anywhere in the world.
With ReefLink and EcoSmart Live, you can adjust your equipment in real-time or design custom schedules. Manipulate colors individually. Change light intensity. Adjust lunar phases, wave patterns and more by using predefined modes or creating your own – the choice is up to you.
Maxspect RSX
$550.00
Maxspect RSX R5
– Lightweight Architectural Grade Aluminum Alloy Frame
– Aerodynamic Passive Cooling Design
– On-Board Advanced Controller with LED Display
– Wireless Controllability with iOS and Android Devices*
– Connect and Control up to 32 RSX Fixtures
– Enhances Coral Growth & Coloration
– Utilizes the 410/420nm Spectrum
– 4 Programmable Color Channels
– Mimic Nature from Dawn to Dusk
– Includes Tank-top Mounting Legs
– Utilizes Cree XLamp, XT-E & XP-E LED chips
– Neptune Systems Apex Controller IOTA Ready**
** Optional iOS and Android control requires Maxspect Connect (ICV6), sold separately. ** Requires ICV6 firmware 1.7 available in November.
Built with a aerodynamic body, the RSX LED Lighting System is designed to seamlessly merge into your living area with elegance and style. The RSX is an all-in-one LED system utilizing the latest in LED technology, including Cree XT-E and XP-E high intensity LED chips distributed in 4 different channels, offering impressive performance and versatility.
Built-in Controller
There’s no need to buy an additional controller just to be able to use your aquarium lighting, the Maxspect RSX has control built-in. The built-in controller integrated in the RSX features an OLED monitor and a control dial, from which user can easily setup all the functions for the fixture.
Standard or Master/Slave Mode
2 or more RSX fixtures can be connected together through the Master/Slave mode to control them simultanousely – all Slave fixtures will follow the settings programmed on the Master fixture, saving time and effort on setting up multiple fixtures.
Control with iOS or Android Devices (Optional)
The RSX can be wirelessly connected to a Maxspect Connect ICV6 controller (sold separately), which allows the RSX fixture(s) to be controlled by iOS or Android devices through the Syna-G app.
Enhanced Growth and Coloration
The RSX Lighting system is designed to provide all ranges of color spectrum required by corals and plants to enhance their growth rate, improve their coloration and at the same time giving your aquarium the most aesthetically pleasing combination of colors. The RSX will meet the requirements of even the most sophisticated group of marine, reef and freshwater hobbyists.
410nm/420nm Super Actinic
The R420R Lighting system also utilizes the 410/420nm Super Actinic LED chips, the spectrum that’s crucial for the success of any reef and water plant aquariums as it is required by Chlorophyll A for photosynthesis, where absorption peaks at 412nm.
Built-in Temperature Control System
The RSX Lighting system deploys an ingenious aerodynamic design which draws cool air from underneath the fixture, through its body which also serves as a large heat sink, to dissipate heat passively. Equipped with fans to regulate fixture temperatures in enclosed environments. The fan(s) will be automatically engage when the temperature is above 55°C/131°F, and disengage when it is below 45°C/113° F.
RSX Specification
| Channel | Led Specs | R5-100 | R5-150 | R5-200 | R5-300 |
| A | Cree XT-E 450-455nm Royal Blue | 4 | 6 | 8 | 12 |
| Cree XT-E 6500k Cool White | 4 | 6 | 8 | 12 | |
| B | Cree XB-D 450-455nm Royal Blue | 8 | 12 | 16 | 24 |
| EpiLED 470-475nm Cool Blue | 8 | 12 | 16 | 24 | |
| C | EpiLED 390-395nm Violet | 2 | 3 | 4 | 6 |
| EpiLED 400-405nm Violet | 2 | 3 | 4 | 6 | |
| EpiLED 410-415nm Violet | 2 | 3 | 4 | 6 | |
| EpiLED 440-445nm Deep Blue | 2 | 3 | 4 | 6 | |
| D | EpiLED 500-505nm Cyan | 2 | 3 | 4 | 6 |
| EpiLED 660-665nm Deep Red | 2 | 3 | 4 | 6 | |
| Cree XB-D 3000K Warm White | 4 | 6 | 8 | 12 |
| Model | R5-100 | R5-150 | R5-200 | R5-300 | |
| Cluster per Model | 2 | 3 | 4 | 6 | |
| Dimension | 468×260×170mm 18.4"×10.2"×6.7" |
700×260×170mm 27.6"×10.2"×6.7" |
839×260×170mm 33"×10.2"×6.7" |
1210×260×170mm 47.6"×10.2"×6.7" |
|
| Net Weight | 2.1kg | 3.1kg | 4kg | 5.5kg | |
| Suit for Tank | 45-70cm 17.7"-27.6" |
70-95cm 27.6"-37.4" |
85-120cm 33.5"-47.2" |
120-150cm 47.2"-59" |
|
| Rate Power | 115W | 160W | 195W | 305W | |
| PSU | Meanwell Irs-150-24 Input:3A/115VAC,1.7A/220VAC Output:24V/6.5A Weight:939g |
Meanwell Irs-200-36 Input:4A/115VAC,2.2A/220VAC Output:36V/5.9A Weight:1.23kg |
Meanwell Irs-200-24 Input:4A/115VAC,2.2A/220VAC Output:24V/8.8A Weight:1.23kg |
Meanwell Irs-350-24 Input:6.8A/115VAC,3.4A/220VAC Output:24V/14.6A Weight:1.23kg |
|
ESHOPPS Curve Refugium Light
$120.00
Descriptions
The Curve Refugium Light is a light-weight unit and easy-to-install. The Curve uses CREE LEDs light and it is as thin as 5/16".Features
- CREE LEDs
- 6500K
- 3x3W
Dimension: 4.5"x4"x5/16"
AI Prime Hanging Kit (White)
$39.00
This hanging kit is for the AI Prime LED unit. It is an elegant way to suspend your AI Prime LED unit above your tank using your existing mounts. The unique ball joint makes it a snap to tilt and turn your Prime for optimal light coverage. Made of high-quality brushed aluminium in silver.
AQUA ILLUMINATION AI Prime (Freshwater)
$319.00
Freshwater Spectrum
The Prime Freshwater is capable of producing a limitless number of spectral combinations to fit your tank’s exacting needs.
Power Output
With a spread of 24" x 24", the AI Prime® Freshwater has a peak PAR of 86µMol at a depth of 24 inches, more than enough for your hungriest of livestock. Drawing a maximum of 55 watts from the wall, it follows in the family’s efficient footsteps.=
36" x 36" inch area at a height of 24 inches over open air.Optics
The AI Prime® Freshwater comes standard with 80 degree lenses giving you the best balance of power and spread. Our lens optics are custom designed, boasting greater than 90% optical efficiency and including a diffuse exit surface to provide improved color blending.
LEDs
The AI Prime® Freshwater utilizes the latest LED technology from leading manufacturers, arranged to provide the best performance.
- 6 - Cree XP-G2 Cool White (> 70 CRI)
- 4 - Cree XP-G2 Warm White
- 1 - Cree XP-E2 Blue
- 1 - Cree XP-E Photo Red
- 1 - Cree XP-E2 Green
ZETLIGHT ZP-3600 185W PRO Reef LED Light
$800.00
PRO II Aquarium Series , ZP-3600 has a beautiful design and build quality. This 185W advanced reef light features a full spectrum LED, quartz optical lens, and a Hybrid-Z 2.0 chip (previous 1.0 chip found in the highly praised Zetlight UFO models).
Users will have the ability to control the ZP-3600 using the Zetlight A200 WIFI Controller (sold separately). Once connected to the A200, users can download the Horizon Aqua app from the Apple App Store (iOS) or Google Play Store (Android) from their smartphone or tablet device.
The Horizon Aqua app enables a variety of features for the ZP-3600 such as customizing the intensity and colors of the light, setting up daytime to nighttime schedules, forecasting cloudy/lightning modes, and many more. The Horizon Aqua app can also increase the functionality of many other Zetlight products including skimmers, wavemakers, return pumps, dosing pumps, and cameras. With such a variety of options, Zetlight can surely please any aquarium.
- Item size: 17.7 x 5.63 x 1.57in (45x14.3x4cm)
- Recommended tank size: 35.4 x 23.6 x 35.4in (90x60x90Hcm)
- Minimum tank size: 31.5 x 19.7 x 19.7in (80x50x50Hcm)
- Lumens: 9200LM
- Total Power: 185W
- PRO II Aquarium Series
- Full spectrum LED
- Quartz optical lens
- Hybrid-Z 20 chip technology
- Luminance transfer technology
avaliable configuration with bracket or hanging kit
Hybrid-Z Technology
Accumulated from years of experience in aquarium keeping, Zetlight has recently developed Hybrid-Z, a technology that involves combining different lights through its special chip, which, through an effective color ratio scheme and a full bio-spectrum acquired from color adjustment and superimposition, does not only furnish the spectrum for different creatures, but also ensures fast growth and stimulates fluorescence that has a high level of color saturation, thereby diminishing the difference from natural sun rays. UFO is made for excellence and has the condensation of craftsmanship from Zetlight staff.
Wireless Control
The Zetlight WIFI Switch controller can be purchased to expand the real-time control of lamps via mobile device, providing more natural changes for professional breeding illumination. The calendar algorithm has enabled more exquisit seasonal changes. The natural and ecological lights displayed through the four-color holographic channels constitute different wavelengths or the spectrum needed for the creatures, thereby providing more available natural and ecological breeding functions.
BOYU LSL-30 SUBMERSIBLE LED STRIP 30CM
$23.10
BOYU LSL-30 Submersible LED strip 30cm
Features:
High sealed and good performance, you can safely use it underwater.
LED long lifespan, energy saving and endurable.
It can be used in aquarium tank.
D-D Slimline Designer Bracket
$125.00
The D-D Slimline Designer Bracket is a sleek and elegant solution to mounting your AI Hydra lights directly onto the back of your aquarium. Designed in in house and produced within the U.K. this substantial aluminium bracket allows you to mount your Ai lighting in style.
Available in Black or Silver powder coated finish.
- Remove the grill from your Ai light by gently pulling it up from the centre.
- Slide the light onto the bracket with the status light facing the mount ( be careful not to damage the crystal indicator of the HD line of lights when installing)
- When in place refit the grill onto the light
- Assemble the mounting clamps and tighten the black hex screws with the included hex key to attach the clamps to the bracket.
- Screw the long plastic black clamp bolt into the clamp and thread the included black plastic nut onto the thread of the bolt with the flaired edge facing the aquarium glass.
- Sit the mount on the aquarium and clamp the brackets in place , to adjust the light height loosen the black nex bolts on the back of the mounting clamps and raise or lower the mount to suit.
- The mount clamps are very secure so adjustment is best done with the light not on the clamp and the clamp away from the aquarium.
- Stick the included cable guides onto the mount, one to guide the cable as it leaves the light and the other on the back of the mount to guide the cable as it runs down the back of the mount.
- The mount is designed to clamp directly to glass or a rigid and secure upstand or pelmet, do not attempt to install the clamp on a pelmet that cannot take the weight of the bracket and light as the bracket may tip forward or at worst the light fall into the aquarium if the pelmet is not designed to carry such a load.
Maxspect Recurve R6 LED Series
$980.00
This striking new unit is available in 3 sizes, a single cluster model up to 160 watts for tanks between 24″ to 36″ long, a 240 watt model with two clusters for tanks between 36″ to 48″ and a bigger unit with three central LED clusters, and up to 320 watts of power for tanks between 48″ and 60″ long.
The Recurve features adjustable LED wings allowing users to concentrate the light towards the centre of the tank for better depth penetration or to widen the spread of light on larger aquariums. This ground-breaking innovation sets the Recurve apart from other lighting units on the market today.
In terms of controllability the Recurve hands you control over 6 channels both manually and via a wireless app for Android and iOS devices. Built in pre-sets will allow the light to mimic natural weather patterns whilst users can also create their own 24 hour programs to customise their lighting like never before.
High quality LED clusters form the nucleus of the unit delivering high PAR light intensity. The revolutionary adjustable wings feature two side-mounted LED strips giving four channels of LED colour control, with individual adjustment possible for a blue, deep blue, red and UV colour channels.
- 30° Adjustable Diffused LED Strips that Mimic Supplemental T5 Lighting
- Ultra Slim Architectural Grade Aluminum Alloy Frame
- On-Board Advanced Controller with OLED Display
- Wireless Controllability with iOS and Android Devices*
- Connect and Control Multiple Recurve Fixtures
- Enhances Coral Growth & Coloration
- Utilizes the 410/420nm Spectrum
- 6 Programmable Color Channels
- Mimic Nature from Dawn to Dusk
- Includes Tank-top Mounting Legs
* Optional iOS and Android control requires Maxspect Connect (ICV6), sold separately.
| Channel | Led Cluster | R6-060 | R6-090 | R6-120 |
| A | Cree XPE-2 470-480nm | 6 | 9 | 12 |
| Cree XTE Royal Blue 452-455nm | 6 | 9 | 12 | |
| luxeon-c Deep Blue 445-450mm | 6 | 9 | 12 | |
| B | Cree XTE Warm White 3000-3500K | 4 | 6 | 8 |
| Cree XTE Cool White 6500-7000K（ | 8 | 12 | 16 | |
| LED Strip | R6-060 | R6-090 | R6-120 | |
| C | Epiled Deep Red 660nm | 36 | 54 | 72 |
| D | Epiled Cyan 505nm | 36 | 54 | 72 |
| E | Epiled Blue 480nm | 36 | 54 | 72 |
| F | Epiled Violet 405nm | 24 | 36 | 48 |
| Epiled Violet 415nm | 24 | 36 | 48 | |
| Epiled Deep Blue 440nm | 24 | 36 | 48 | |
| Model | R6-060 | R6-090 | R6-120 |
| Dimension | 600x445x118mm 23.6”x17.5”x4.6” | 900x445x118mm 35.4”x17.5”x4.6” | 1200x445x118mm 47.2”x17.5”x4.6” |
| Net Weight | 4.35kg | 6.35kg | 8.35kg |
| Suit for Tank | 600-900mm 23.6"-35.4"(2'-3') | 900-1200mm 35.4"-47.2"(3'-4') | 1200-1500mm 47.2"-59"(4'-5') |
| Rate Power | 160W | 240W | 320W |
| PSU | Meanwell lrs-200-24 Input: 4A/115VAC, 2.2A/220VAC Output:24V/8.8A Weight:939g | Meanwell lrs-350-36 Input: 6.8A/115VAC, 3.4A/220VAC Output:36V/9.7A Weight:1.23kg | Meanwell lrs-350-36 Input: 6.8A/115VAC, 3.4A/220VAC Output:36V/9.7A Weight:1.23kg |
Atlantik V3 WiFi LED Reef Aquarium Light
$1,688.00
Features:
- NEW 78 Customized high efficiency 5w Dual-Chip power LEDs , Total 156 chip
- New Spectrum for better coral growth, color and health
- New super blue LED for more fluorescence coral color
- 04 Channel group of LEDs control
- Android Wireless technologies / Wi-Fi/ WLAN/ IEEE802.11b/g/i / Wi-Fi/ WLAN/WPA/WPA2/PSK
- Built-in battery backup memory
- High efficiency Mean Well Fan-less power supply
- Eight pre-installed programs
- Full dimming capacity in all channels
- Large storage with capacity for additional programs
- Ability to program multiple Atlantiks simultaneously
- Highest PAR/PUR
- 7 Different types of LEDs
- Two lens versions Wide convex and narrow Deep
LED channel layout
The LED channel layout has changed and with our new LEDs and channel layout, Kelvin temperature can be changed by adjusting intensity levels in two channels. This allows the user to create the ideal spectrum for the life forms he is keeping, including warmer shallow water species where most colors are not filtered out by the water.
With our new high output LEDs and channel layout you can now control the Kelvin temperature by adjusting Channel 1 and 2. This allows you to to control the Kelvin temperature of the white and blue LEDs from 18K to 30K.
By combining and adjusting Channel 2 and Channel 3, you can create stunning shimmer and beautiful coral florescence. Channel 2 and 3 uses 410-460nm LEDs resulting in a wide array of color possibilities in the blue/violet color range.
If you desire the spectrum found in warm shallow waters, Channel 4 combined with Channel 1 will allow you to create Kelvin temperatures between 10K and 18K for that warm appearance found in shallow water.
In the V3 we have altered the spectrum in each channel slightly to allow more control over the white temperature allowing a more natural display. Below is a breakdown of each channel’s features.
Channel 1
Channel 1 features a 20K Kelvin temperature but does not appear as blue as a metal halide 20K lamp.
Channel 2
Channel 2 features 460nm LEDs which give you a skylight blue color.
Channel 3
Channel 3 is our violet channel which features all 410nm wide range LEDs and two, 420nm wide range LEDs. This mix fully covers the 410-420nm range which promotes chlorophyll A production in coral. Channel 3 also enhances the florescence in coral in areas where blue LEDs fail to do.
Channel 4
Channel 4 is a mix of wide range red and high Kelvin white LEDs.
All Channel 100%
***Spectrum Test by : Ronny Schöpke AT v3 Spectrum
PAR MAP / Cover area
one unit will light a 48 x 24 inch reef tank and provide the PAR necessary to grow light loving SPS coral.
© 2018 Fresh N Marine. All rights reserved.
