Chillers & Heaters
AQUAEL Ultra Heater 50w
$58.00
A new generation of aquarium heaters distinguished by impact-resistant plastic housing and an extremely precise, electronic thermostat.
The heater is controlled by an extremely convenient ONE-TOUCH system consisting of a single button and a ring of LEDs indicating the current and programmed temperature. The electronic thermostat operates with an exceptional precision of +/- 0.25 ° C, maintaining a constant temperature in the aquarium, which ensures thermal comfort even to the most sensitive species of aquarium animals. The temperature regulation range is between 20 and 33 ° C , which allows the heater to be used to treat many fish diseases, eg fish pox. ULTRA HEATER also has a built-in system to prevent overheating of water in hot weather . Unbreakable housingmade of plastic makes the ULTRA HEATER heaters perfectly suitable for tanks with large, strong fish and even water turtles. At the same time, they are completely safe and do not infiltrate the inhabitants of the aquarium , even as sensitive as brine or rays.
AQUAEL Ultra Heater 25w
$48.00
A new generation of aquarium heaters distinguished by impact-resistant plastic housing and an extremely precise, electronic thermostat.
The heater is controlled by an extremely convenient ONE-TOUCH system consisting of a single button and a ring of LEDs indicating the current and programmed temperature. The electronic thermostat operates with an exceptional precision of +/- 0.25 ° C, maintaining a constant temperature in the aquarium, which ensures thermal comfort even to the most sensitive species of aquarium animals. The temperature regulation range is between 20 and 33 ° C , which allows the heater to be used to treat many fish diseases, eg fish pox. ULTRA HEATER also has a built-in system to prevent overheating of water in hot weather . Unbreakable housingmade of plastic makes the ULTRA HEATER heaters perfectly suitable for tanks with large, strong fish and even water turtles. At the same time, they are completely safe and do not infiltrate the inhabitants of the aquarium , even as sensitive as brine or rays.
Chill Solutions CSXC-1 Chiller Wall Mount Kit
$35.00
Please read all instructions before installing. Instruction manual can be found HERE.
ISTA External Heater 500W
$75.00
Features
- Thermal spraying glass, speed up the heating process, higher efficiency.
- External design, easy to install and doesn't occupy space in the tank.
- Two sensors to examine the temperatures of water inlet and outlet.
- Auto power off safety system when temperature is over 36 degrees celcius/ temperature is 3 degrees celcius more than setting temperature/ difference between two sensors is over 5 degrees celcius
Input: AC230V 50Hz
ISTA External Heater 300W
$65.00
Features
- Thermal spraying glass, speed up the heating process, higher efficiency.
- External design, easy to install and doesn't occupy space in the tank.
- Two sensors to examine the temperatures of water inlet and outlet.
- Auto power off safety system when temperature is over 36 degrees celcius/ temperature is 3 degrees celcius more than setting temperature/ difference between two sensors is over 5 degrees celcius
Input: AC230V 50Hz
Chill Solutions CSXC-1 Thermoelectric Aquarium Chiller
$400.00
Powerheads, pumps, UV sterilizers and high-intensity lighting all add undesirable heat into the aquarium. The CSXC-1 chiller is perfect for nano tanks, hydroponics setups, and aquariums up to 30 gallons (depending on heat input). The same thermoelectric technology used in this device is used by NASA to generate electricity and maintain equipment temperature in space!
Chill Solutions CSXC-1 Features:
- Powerful - Recommended for tanks up to 30 gallons
- Smart - Intelligent fan speed control eliminates unnecessary noise
- Thermoelectric Technology - Directly converts electrical power into cooling power
- Quiet - No mechanical compressors
- Reliable - Only one moving part!
- Easy Install - No drilling necessary
- Fully Proportional Temperature Control - Control circuit uses high-efficiency PWM (pulse width modulation) technology to maintain your set temperature
- Environmentally Friendly - No refrigerants or ozone depleting chemicals
- Quality Construction - Fasteners are 18-8 stainless steel.
- Accepts 1/2" vinyl tubing
- Made in USA
KEY COMPONENTS
- HIGH DENSITY POLYETHYLENE (HDPE) BASE - Chemically inert and practically indestructible... This is the same plastic used to make construction hard-hats
- CERAMIC THERMOELECTRIC ELEMENT
- INTERNAL TEMPERATURE SENSOR - No external temperature probe wires, the CSXC-1 senses the water flowing through it.
- SILICONE SEALING O-RING - High quality silicone allows use in setups with ozonizers and UV sterilizers
POWER SUPPLY
The power supply can accept worldwide voltages from 100-240v. It comes with a standard 3-prong US power cord. If you want to use it in any other location only an inexpensive plug converter is needed, NOT a voltage converter. Contact us if you have any questions.
Average Temperature Reduction- 10 gallons: 10+°F (5+°C)
- 20 gallons: 5-8°F (3-5°C)
- 30 gallons: 2-4°F (1.3-2.5°C)
*The values shown above are just guidelines. Actual values depend on individual tank specifications, insulation, equipment used, environmental conditions, etc.
This high-tech nano chiller will keep your water temperature stable despite daily fluctuations in ambient room temperature. At Chill Solutions we have specifically designed the CSXC-1 to be used in a wide variety of cooling applications. The built-in thermostat can be set anywhere from 45F (7C) to 90F (32C), making it perfect for nano reef tanks, pico tanks, cold water aquariums, reef or fish only aquariums, temperate tanks, freshwater tanks, various hydroponics setups, beer chillers, wort chillers, other homebrew / microbrew setups, as well as in laboratory and research applications. An external circulation pump (50 - 300 gph) (200 - 1100 lph) is required unless you already have a canister filter or other circulation loop in place.
PRODUCT INFORMATION
- NANO CHILLER DIMENSIONS: 4" Wide x 5.25" Deep x 4"
- RECOMMENDED FLOW RATE: Between 40 and 250 GPH - This is not an absolute requirement. The chiller will work with flow rates outside this range, these are just recommended values.
- NOTICE FOR AERATED HYDROPONIC USE - If there is a large amount of warm air being injected into a given hydro setup, the temperature pulldown may be less than what is listed in the chart above. This is because the injected air is heating the water via conductive heat transfer and this heat input will lessen the ultimate achievable temperature pulldown
Verdict from FNM: Successfully chilled a Innovative Marine Lagoon 25 Gal operating in a 28°C ambient environment to 23°C in the tank, Now Running in our retail outlet @ 82 MacPherson Lane #01-17 Singapore 360082.
Good reasons to invest in this product:
- Compact & space saving (about palm size in footprint)
- Ultra Quiet
- Made in USA
- 1 year warranty covering manufacturer's defect
AQUAZONIC ECO 100W AQUARIUM HEATER
$10.00
Fully automatic and adjustable aquarium heater.
Water temperature is fully in consistent and heat is evenly distributed throughout.
Automatically maintains temperature selected throughout the tank.
Reliable and steadily built structure guarantees effectiveness.
- Temperature dial is easy to read and set.
- Special glass tube is highly resistant against heat and shock.
- Visible ON/OFF indicator lamp.
- Totally submersible.
- Special adhesive suckers and clip to keep heater in place firmly.
- Suitable for tropical or marine tanks.
Teco Chiller TK4000
$4,950.00
Teco Chiller TK4000
MADE IN ITALY design and production
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The setting range is 0°-35°C (32°F-95°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential (0.5°C/1°F). Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The functionality of the shape and the compact size are also suitable for confined spaces.
Unique Feature
The innovative TECOair SYSTEM (Figure 1) makes it possible to rotate the conveyor, thus ensuring optimal air exchange for the chiller and heat output from the cabinet. Quick and easy magnetic air filter maintenance. Moreover, the innovative “pinch off plier” allows easy removal of the chiller for maintenance. The standard built-in heater ensures continuous and optimal maintenance of temperature in all use conditions.
Technical Details
- Supply - 230V-50Hz (others supplies available on quantity)
- Cooling Power Consumption - 750 w
- Ecological Refrigerant - R410A
- Min. Flow rate - 3000 lt / h
- Tank Size - up to 3000 lt
- (water temp. 25°C - Room temp. 30°C - Heating load 0,3 w / lt)
- Dimensions - mm. 395 x 600 x 565 (h)
- Dimensions - in. 15.55 x 23.62 x 22.24 (h)
- Connections - fitting 1" - 25mm int. tube diameter
Free Local Delivery.
Teco Chiller TK3000
$4,300.00
Teco Chiller TK3000
MADE IN ITALY design and production
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The setting range is 0°-35°C (32°F-95°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential (0.5°C/1°F). Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The functionality of the shape and the compact size are also suitable for confined spaces.
Unique Feature
The innovative TECOair SYSTEM (Figure 1) makes it possible to rotate the conveyor, thus ensuring optimal air exchange for the chiller and heat output from the cabinet. Quick and easy magnetic air filter maintenance. Moreover, the innovative “pinch off plier” allows easy removal of the chiller for maintenance. The standard built-in heater ensures continuous and optimal maintenance of temperature in all use conditions.
Technical Details
- Supply - 230V-50Hz (others supplies available on quantity)
- Cooling Power Consumption - 750 w
- Ecological Refrigerant - R410A
- Min. Flow rate - 3000 lt / h
- Tank Size - up to 3000 lt
- (water temp. 25°C - Room temp. 30°C - Heating load 0,3 w / lt)
- Dimensions - mm. 395 x 600 x 565 (h)
- Dimensions - in. 15.55 x 23.62 x 22.24 (h)
- Connections - fitting 1" - 25mm int. tube diameter
Free Local Delivery.
Teco Chiller TK150
$880.00
Teco Chiller TK150
MADE IN ITALY design and production
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The setting range is 0°-35°C (32°F-95°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential (0.5°C/1°F). Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The functionality of the shape and the compact size are also suitable for confined spaces.
Unique Feature
The innovative TECOair SYSTEM (Figure 1) makes it possible to rotate the conveyor, thus ensuring optimal air exchange for the chiller and heat output from the cabinet. Quick and easy magnetic air filter maintenance. Moreover, the innovative “pinch off plier” allows easy removal of the chiller for maintenance. The standard built-in heater ensures continuous and optimal maintenance of temperature in all use conditions.
Technical Details
- Supply - 230V-50Hz (others supplies available on quantity)
- Cooling Power Consumption - 150 w
- Ecological Refrigerant - R134a
- Min. Flow rate - 400 lt / h
- Tank Size - up to 150 lt
- (water temp. 25°C - Room temp. 30°C - Heating load 0,3 w / lt)
- Dimensions - mm. 215 x 361 x 315 (h)
- Dimensions - 8.46 x 14.21 x 12.4 (h)
- Connections - fitting 1/2" - 12mm int. tube diameter
Free Local Delivery.
Teco Chiller TK1000
$1,350.00
Teco Chiller TK1000
MADE IN ITALY design and production
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The setting range is 0°-35°C (32°F-95°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential (0.5°C/1°F). Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The functionality of the shape and the compact size are also suitable for confined spaces.
Unique Feature
The innovative TECOair SYSTEM (Figure 1) makes it possible to rotate the conveyor, thus ensuring optimal air exchange for the chiller and heat output from the cabinet. Quick and easy magnetic air filter maintenance. Moreover, the innovative “pinch off plier” allows easy removal of the chiller for maintenance. The standard built-in heater ensures continuous and optimal maintenance of temperature in all use conditions.
Technical Details
- Supply - 230V-50Hz (others supplies available on quantity)
- Cooling Power Consumption - 315 w
- Ecological Refrigerant - R134a
- Min. Flow rate - 500 lt / h
- Tank Size - up to1000 lt
- (water temp. 25°C - Room temp. 30°C - Heating load 0,3 w / lt)
- Dimensions - mm. 310 x 310 x 458 (h)
- Dimensions - in. 12.2 x 12.2 x 18.03 (h)
- Weight - 19,7 kg
- Connections - fitting 3/4" - 16mm int. tube diameter
Free Local Delivery.
JBJ Arctica-Commerical Chiller DA-500B 1/2HP
$2,193.50
Arctica Titanium Commercial Chiller
Advanced Features
Titanium "Helix" Heat Exchanger
Unique titanium coil design allows for maximum contact exposure. The absolute best element for heat exchange and corrosion resistance on the market.
Energy Efficiency
These units provide the highest BTU (British Thermal Units) heat removal capacity with the lowest amperage draw.
Full Auto IC Digital LED Control System
This state-of-the-art digital LED thermostat system will automatically control your temperature within +1/-1 Fahrenheit from your desired set point. Bright LED allows for constant temperature reading with an "easy" calibration function. We have even added a "Thermal Chip" in the control system that will prevent the heat exchanger from freezing due to controller failure or low water flow. Our Smart-Chip will store and reset the controller in case of a power failure.
"Easy Hook-Up"
Our unique design allows the unit to be "hooked-up" without any tools or hard plumbing. We offer commercial grade compression fittings to be used with 1" & 1.25" PVC. These watertight fittings will handle up to a maximum working pressure of 25 PSI.
Lowest Noise and Vibration Level
Our commercial series chillers provide the lowest noise and vibration level in the "industrial" classification.
Side Handles
ABS molded handles allow for easy lifting and moving.
1 Year Warranty
JBJ warranties all commercial chillers for 1 full year from the date of purchase.
Specifications
- Recommended aquarium size: 150 gal.
- BTU: 6,000 BTU/h
- Amps: 5.1
- Dimensions (W x D x H) : 21" x 14" x 15"
- Flow Rate: 480 - 800 gph
- Inlet / Outlet Size: 1"
- Weight: 55 lbs.
JBJ Arctica Titanium Chiller DBA-075 1/10HP
$1,177.00
Arctica Titanium Aquarium Chillers are state-of-the-art aquarium coolers incorporating the most advance technological features compared to any other chiller on the market. Many years of research and development has allowed us to offer the perfect solution to stabilize water temperatures for your aquarium environment. These units have been designed for maximum temperature pull-down (BTU`s) with the least amount of energy draw.
Pump(s) or some way to circulate water through the chiller are required and sold separately.
Specifications
- Horsepower: 1/10hp
- Capacity: 1270 BTU/hr
- Voltage: 115V
- Amps: 2.63A
- Flow Rate (min/max): 4/16 gpm
- Dimensions: 16.5" x 9.8" x 18.5"
Teco Chiller TK2000
$1,580.00
Teco Chiller TK2000
MADE IN ITALY design and production
Efficient Cooling Technology
The exclusive use of high-quality compressors and of the titanium coaxial heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP (Coefficient Of Performance) contributing to significant energy savings.
Digital Thermostat
Intuitive setting of functions and accurate temperature detection, resolution 0.1°C/0.2°F. The setting range is 0°-35°C (32°F-95°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential (0.5°C/1°F). Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The functionality of the shape and the compact size are also suitable for confined spaces.
Unique Feature
The innovative TECOair SYSTEM (Figure 1) makes it possible to rotate the conveyor, thus ensuring optimal air exchange for the chiller and heat output from the cabinet. Quick and easy magnetic air filter maintenance. Moreover, the innovative “pinch off plier” allows easy removal of the chiller for maintenance. The standard built-in heater ensures continuous and optimal maintenance of temperature in all use conditions.
Technical Details
- Supply - 230V-50Hz (others supplies available on quantity)
- Cooling Power Consumption - 440 w
- Ecological Refrigerant - R134a
- Min. Flow rate - 600 lt / h
- Tank Size - up to 2000 lt
- (water temp. 25°C - Room temp. 30°C - Heating load 0,3 w / lt)
- Dimensions - mm. 310 x 310 x 500 (h)
- Dimensions - in. 12.2 x 12.2 x 19.96 (h)
- Connections - fitting3/4" - 16mm int. tube diameter
Free Local Delivery.
JBJ Arctica-Commerical Chiller DA-1500B 1.5HP
$2,782.00
Arctica Titanium Commercial Chiller
Advanced Features
Titanium "Helix" Heat Exchanger
Unique titanium coil design allows for maximum contact exposure. The absolute best element for heat exchange and corrosion resistance on the market.
Energy Efficiency
These units provide the highest BTU (British Thermal Units) heat removal capacity with the lowest amperage draw.
Full Auto IC Digital LED Control System
This state-of-the-art digital LED thermostat system will automatically control your temperature within +1/-1 Fahrenheit from your desired set point. Bright LED allows for constant temperature reading with an "easy" calibration function. We have even added a "Thermal Chip" in the control system that will prevent the heat exchanger from freezing due to controller failure or low water flow. Our Smart-Chip will store and reset the controller in case of a power failure.
"Easy Hook-Up"
Our unique design allows the unit to be "hooked-up" without any tools or hard plumbing. We offer commercial grade compression fittings to be used with 1" & 1.25" PVC. These watertight fittings will handle up to a maximum working pressure of 25 PSI.
Lowest Noise and Vibration Level
Our commercial series chillers provide the lowest noise and vibration level in the "industrial" classification.
Side Handles
ABS molded handles allow for easy lifting and moving.
1 Year Warranty
JBJ warranties all commercial chillers for 1 full year from the date of purchase.
Specifications
- UL Listed
- Recommended aquarium size: 400 gal.
- BTU: 18,000 BTU/h
- Amps: 8.8
- Dimensions (WxDxH) : 26" x 15" x 19"
- Flow Rate: 960 - 1,420 gph
- Inlet / Outlet Size: 1"
- Weight: 84 lbs.
JBJ Arctica-Commerical Chiller DA-3000B 3HP
$4,173.00
Arctica Titanium Commercial Chiller
Advanced Features
Titanium "Helix" Heat Exchanger
Unique titanium coil design allows for maximum contact exposure. The absolute best element for heat exchange and corrosion resistance on the market.
Energy Efficiency
These units provide the highest BTU (British Thermal Units) heat removal capacity with the lowest amperage draw.
Full Auto IC Digital LED Control System
This state-of-the-art digital LED thermostat system will automatically control your temperature within +1/-1 Fahrenheit from your desired set point. Bright LED allows for constant temperature reading with an "easy" calibration function. We have even added a "Thermal Chip" in the control system that will prevent the heat exchanger from freezing due to controller failure or low water flow. Our Smart-Chip will store and reset the controller in case of a power failure.
"Easy Hook-Up"
Our unique design allows the unit to be "hooked-up" without any tools or hard plumbing. We offer commercial grade compression fittings to be used with 1" & 1.25" PVC. These watertight fittings will handle up to a maximum working pressure of 25 PSI.
Lowest Noise and Vibration Level
Our commercial series chillers provide the lowest noise and vibration level in the "industrial" classification.
Side Handles
ABS molded handles allow for easy lifting and moving.
1 Year Warranty
JBJ warranties all commercial chillers for 1 full year from the date of purchase.
Specifications
- Recommended aquarium size: 800 gal.
- BTU: 36,000 BTU/h
- Amps: 16
- Dimensions (W x D x H) : 26" x 15" x 36"
- Flow Rate: 1920 - 2880 gph
- Inlet / Outlet Size: 1 1/4"
- Weight: 138 lbs
JBJ Arctica-Commerical Chiller DA-2000B 2HP
$3,300.00
Arctica Titanium Commercial Chiller
Advanced Features
Titanium "Helix" Heat Exchanger
Unique titanium coil design allows for maximum contact exposure. The absolute best element for heat exchange and corrosion resistance on the market.
Energy Efficiency
These units provide the highest BTU (British Thermal Units) heat removal capacity with the lowest amperage draw.
Full Auto IC Digital LED Control System
This state-of-the-art digital LED thermostat system will automatically control your temperature within +1/-1 Fahrenheit from your desired set point. Bright LED allows for constant temperature reading with an "easy" calibration function. We have even added a "Thermal Chip" in the control system that will prevent the heat exchanger from freezing due to controller failure or low water flow. Our Smart-Chip will store and reset the controller in case of a power failure.
"Easy Hook-Up"
Our unique design allows the unit to be "hooked-up" without any tools or hard plumbing. We offer commercial grade compression fittings to be used with 1" & 1.25" PVC. These watertight fittings will handle up to a maximum working pressure of 25 PSI.
Lowest Noise and Vibration Level
Our commercial series chillers provide the lowest noise and vibration level in the "industrial" classification.
Side Handles
ABS molded handles allow for easy lifting and moving.
1 Year Warranty
JBJ warranties all commercial chillers for 1 full year from the date of purchase.
Specifications
- Recommended aquarium size: 2000 L
- Capacity: 4690 watts
- Voltage: 220-240v
- Frequency: 50Hz
- Amps: 12.1
- Flow rate: 4800 - 7200 l/hr
- Dimensions (W x D x H) : 670 mm x 450 mm x 940 mm
- Inlet / Outlet Size: 1" PVC Union
JBJ Mini-Arctica Chiller 1/15hp DBI-050
$889.00
Enhancing the Nano-Experience
JBJ introduces the revolutionary NANO & MINI Arctica Chillers! Finally, there is a REAL long-term solution for heat concerns in Nano environments with amazing cooling capabilities beyond thermal-electric and fans, that produce less than minimal results.
The Mini-Arctica handles up to 40g aquariums. Don't be fooled by the smaller size. These are driven by energy efficient 1/15 Hp compressors that can drop temperatures beyond anything comparable in the market!
A Tradition of Excellence
You can be rest assured that this smaller compact version incorporates the same high performance and reliable day to day operations as our # 1 selling aquarium chillers, commercial chillers, and custom OEM projects with the premium Arctica branded name.
Screening Process
All chillers require clean air flow to achieve optimal efficiency, we've now made it easier with a removal screen for quick and easy cleaning.
A New Generation
The industry's first Nano Chiller that utilizes a nano compressor for maximum cooling capacity. The Arctica Nano & Mini chillers simply put, OUTPERFORM thermal electric/peltier equipment since it utilizes R-134-A refrigerant gas to drop temperatures with ease. Truly the BENCHMARK of mini chillers!
Quiet... Please
We know noise is a concern, so we've designed the chiller with that in mind. The Nano & Mini Arctica Series have the lowest noise and vibration level in its' class.
Dial In
Is equipped with an integrated analog temperature controller and probe with a +/- 0.5 C differenece from the set point. Simply turn the dial to your desired temperature setting and our controller will do the rest.
Temperature Setting Range: 23 C - 27 C
Stay Alert
Controllers are equipped with a malfunction ALARM system. A visible LED signals any problems with the chiller's performance.
Style & Elegance
Designed for in-home use, with a contemporary style and luxury finish. An added welcome to any room in the house without the commercial look.
Size Matters
The smallest footprint in the Arctica Line-up. The Nano & Mini Series only require a 7.72" x 12.6" space for placement.
Features
- Capacity: 2,400 BTH/hr
- Flow Rate: 1800L/hr (8 GPM)
- Tank Size: Up to 680L (180 gallons)
- Water Connections: 5/8", 1/2", 3/4"
Hailea HS-90A 1/2HP
$648.00
New Model replacing Hailea HC-500A.
Hailea HC chillers have strong metal chassis with a housing of contemporary design,ensuring the chiller does not look out of place in any surroundings and as with other cooling units,our chillers-the HC series use the environmental friendly refrigerant R134a.
Lower noise design,whilst the digital temperature controller ensures that the selected temperature is maintained.
The rate of flow is decided according to the max jet of the pump(immersible power filter) and the circulation equipment.
Specifications:
- Dimensions (mm) : 460x320x595 mm
- Recommended Flow (LPH) 1200-3000
- Suitable for aquariums up to 1200L
- Current - 2.2A
- Power 480W / 220-240V
- 1/2 Year Warranty
Hailea HS-66A 1/4HP
$488.00
Hailea HC chillers have strong metal chassis with a housing of contemporary design,ensuring the chiller does not look out of place in any surroundings and as with other cooling units,our chillers-the HC series use the environmental friendly refrigerant R134a.
Lower noise design,whilst the digital temperature ontroller ensures that the selected temperature is maintained.
The rate of flow is decided according to the max jet of the pump(immersible power filter) and the circulation equipment.
Specifications:
- Dimensions (mm) : 295x435x470 mm
- Recommended Flow (LPH) 1000-2500
- Suitable for aquariums up to 800L
- Current - 1.8A
- Power 400W / 220-240V
1/2 Year Warranty
Hailea HS-28A 1/10HP
$398.00
Hailea HC chillers have strong metal chassis with a housing of contemporary design,ensuring the chiller does not look out of place in any surroundings and as with other cooling units,our chillers-the HC series use the environmental friendly refrigerant R134a.
Lower noise design,whilst the digital temperature ontroller ensures that the selected temperature is maintained.
The rate of flow is decided according to the max jet of the pump(immersible power filter) and the circulation equipment.
Specifications:
- Dimensions (mm) : 400x220x350 mm
- Recommended Flow (LPH) 250-1200
- Suitable for aquariums up to 400L
- Power: 240W / 220-240V
- Current - 1.1A
1/2 Year Warranty
Not applicable for international shipping outside Singapore.
Hailea HC-100A 1/20HP
$368.00
Hailea HC chillers have strong metal chassis with a housing of contemporary design,ensuring the chiller does not look out of place in any surroundings and as with other cooling units,our chillers-the HC series use the environmental friendly refrigerant R134a.
Lower noise design,whilst the digital temperature ontroller ensures that the selected temperature is maintained.
The rate of flow is decided according to the max jet of the pump(immersible power filter) and the circulation equipment.
Specifications:
- Dimensions (mm) : 338x218x325
- Recommended Flow (LPH) 200-1000
- Suitable for aquariums up to 220L
- Weight - 9.2kg
*With a water temperature of 28ºC and a cooling time of 20 hours
- 130 litres will drop to 16ºC
- 260 litres will drop to 22ºC
1/2 Year Warranty
JBJ Arctica Titanium Chiller DBE-200 1/4HP
$1,530.00 $1,800.00
Arctica Titanium Aquarium Chillers are state-of-the-art aquarium coolers incorporating the most advance technological features compared to any other chiller on the market. Many years of research and development has allowed us to offer the perfect solution to stabilize water temperatures for your aquarium environment. These units have been designed for maximum temperature pull-down (BTU`s) with the least amount of energy draw.
Pump(s) or some way to circulate water through the chiller are required and sold separately.
Specifications
- Horsepower: 1/4hp
- Capacity: 3000 BTU/hr
- Voltage: 115V
- Amps: 6A
- Flow Rate (min/max): 8/32 gpm
- Dimensions: 16.5" x 9.8" x 20.9"
- Weight: 51 lbs
JBJ Arctica Titanium Chiller DBM-250 1/3HP
$1,955.00 $2,300.00
Arctica Titanium Aquarium Chillers are state-of-the-art aquarium coolers incorporating the most advance technological features compared to any other chiller on the market. Many years of research and development has allowed us to offer the perfect solution to stabilize water temperatures for your aquarium environment. These units have been designed for maximum temperature pull-down (BTU`s) with the least amount of energy draw.
Pump(s) or some way to circulate water through the chiller are required and sold separately.
Specifications
- Horsepower: 1/3hp
- Capacity: 4000 BTU/hr
- Voltage: 115V
- Amps: 7.25A
- Flow Rate (min/max): 8/40 gpm
- Dimensions: 15.7" x 13.7" x 17.7"
- Weight: 61 lbs
© 2019 Fresh N Marine. All rights reserved.
