The HI747-25 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Copper Low Range Checker® HC. These reagents follow the Bicinchoninate Method in which the reaction between copper and the reagent causes a purple tint in the sample. By simply adding the packet of HI747-25 reagent to the sample, the reaction will take place and the HI747 will determine the concentration from the color that is produced. The results will be displayed in ppb of copper. These reagents are designed to be used with samples that have an expected range of 0 to 999 ppb copper.
AquaHomeTest NO2+NO3 | Combi-Test for seawater-aquarium
AquaHomeTest Ca+Mg: Calcium+Magnesium | Combi-Test for seawater-aquarium
The Fauna Marin Phosphate Test is very high-resolution and can determine the phosphate concentration with a particularly high accuracy in the low concentration range between 0.01 and 1 mg/l with clear color recognition.
The carbonate hardness (KH) or alkalinity* of a water sample characterises the buffering capacity, i.e. the ability to maintain the pH value of the water. It is primarily defined by the proportion of hydrogen carbonate ions in the water. As the pH value increases, other basic ions such as the hydroxide ions also contribute to the alkalinity. The alkalinity should be tested in all aquariums regularly. If the alkalinity in the aquarium is too low, the pH value can sink (sudden drop in acidity) to a level which is life-threatening for many fish and invertebrates. In reef aquariums, an adequate alkalinity is essential for strong coral growth. On the other hand, an overly high alkalinity in saltwater tanks can lead to lime precipitates and also have a negative impact on coral growth.
*There are many terms in water chemistry to describe the buffering capacity with varying definitions. The term “carbonate hardness” is customary in reef- and fishkeeping; however, it is the alkalinity which is measured. In this test, both terms are used synonymously. The reading for alkalinity is usually given in degrees of German hardness (°dKH). You can find a table for converting this unit into other common units (such as the equivalence unit millival per litre (mval/l) or the volume of substance in mmol/l) on the second cover page.
Natural seawater has an alkalinity of 6.5 °dKH. The alkalinity in saltwater aquariums should range from 6 to 9 °dKH.
Ask your specialist retailer for the correct alkalinity for your tank.
How to correct unfavourable values:
To increase the alkalinity when levels are too low, we recommend using Fauna Marin Carbonate MIX or Fauna Marin Easy dKH.
Contents of package: