Tunze Nano Care Magnet 0220.006 Up to 6mm Glass Algae Scraper
With the Tunze Pico Care magnet there is a gap between the magnet and the glass wall being cleaned, this is to prevent gravel catching between the magnet and the glass and scratching the glass. The point that actually tough the glass is the two side blades on the inside of the tank and the soft felt pads on the outside of the glass attached to the magnet.
The magnet does a very good job of removing film build ups as well as algae and is a quick and easy way of cleaning the tank. The way that Tune have designed the Nano Care Magnet also allows cleaning very close to the edges of aquariums as well as being able to get down to the substrate.
The Tunze is a powerful magnet scraper to remove algae and build up on the inside glass of Aquariums. It will work with glass thickness of up to 6mm and has a plastic blade to scrape the algae and build up on the glass.
The "Care Magnet" is a breath of fresh air in the field of aquarium pane cleaner design, consisting of an ergonomic handle and special plastic blades made of wear-resistant high performance plastic. The patented slim Care Magnet is significantly more compact than conventional algae magnets with a large cleaning surface, it is unobtrusive and therefore able to remain within the aquarium without disrupting the overall scenery.
This window pane cleaner doesn't cause any scratches on internal aquarium panes, glass or acrylic. The inner magnet is more than 3mm away from the aquarium and thus prevents the jamming of the aquarium sand. The two plastic blades remove the algae considerably better from the glass panes than a flat cleaning surface - almost as good as a sharp metal blade. The life of a blade is from several months up to approx. one year. The low flow resistance during the cleaning with a simultaneous high magnetic coupling, makes a separation of the magnet nearly impossible.
Tunze Co2 Pressure Reducer 7077/3
Precision device with fine adjustment for standard CO2 cylinders, thread in keeping with German standard DIN 477 (US version with CGA 320 thread). To be mounted without tools; precise adjustment; two pressure gauges; pressure-relief valve. Made in Germany.
Dennerle CO2 Night Cut-off Valve Comfort
For magnificent plant growth, DENNERLE recommends a CO2 content in the aquarium of approx. 20 mg/l.
As certain correlations apply between CO2 content, carbonate hardness (CH) and pH value, the CO2 content in the water can be calculated according to a simple procedure:
Measure the carbonate hardness of your aquarium water.
Read the pH value which corresponds to the desired CO2 content from the table. You should set this pH value +/- 0.1 by adjusting the number of bubbles accordingly. Example: Carbonate hardness 4 °d, recommended pH 6.8 +/- 0.1.
The procedure is even simpler with the DENNERLE CO2 long-term test Correct + pH.
$18.00Dymax Base Soil series decreases the hardness of the water and lower the pH level to the degree at which most aquatic plants can consume nutrients and comfortably grow. The soil granules maintain the shape and density underwater security good circulation of water oxygen through the substrate. With Dymax Base Soil, growing difficult plants become easier and it is ideal for fishes demanding soft water.
XStream-E Wave Pump
24V WAVE PUMP INCLUDING MINI CONTROLLER
CIRCULATION AND STREAM PUMP WITH ELECTRONIC CONTROL
XSTREAM-E incorporates the new DC technology and is ideal to be used in advanced marine tanks to create the most natural waves. An adjustable flow rate and 4 pre-set timing programs embody all what is needed for any easy and professional aquarium care.
DETAILS: The controller features 5 LED lights indicating both speed and 4 pre-set timing programs: