Seneye 3 Slide Pack (NH4 & pH)
This pack includes three slides totalling 3 months seneye+
The seneye+ includes the disposable seneye slide, e-mail alerts, automatic online graphing, and personalised advice. Activating your seneye+ is really easy and the disposable slide removes the need for recalibration (and the cost of recalibration fluids/buffers etc…) and better still it improves accuracy.
* the seneye+ has a recommended use by date of 12 months from date of manufacture, always store in a cool dry dark place.
monitor the invisible killers in your aquarium
The highly accurate disposable seneye slide ensures there is no calibration of the device needed, simply replace each month for accurate and reliable readings.
Your replacement slide allows for the monitoring of free ammonia and pH. The free ammonia (NH3) sensor allows for detection of this highly toxic chemical at very low levels. The pH sensor allows for monitoring of your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved.
Early warning, intelligent software predicts future water conditions
The intelligent software in the seneye system monitors all the readings as they are delivered and using our sophisticated algorithm your levels will be predicted based on your previous readings, type of environment and the volume of water.
graphing you can see around the world
With the seneye+ your data is automatically graphed for you allowing you to instantly see any developing trends. You can access results from your seneye.me account worldwide, the reasons are stored online for easy viewing.
Convenient alerts sent to e-mail and mobile phone
Automatic alerts when your levels increase or decrease can be sent to your e-mail address or optionally to your mobile phone via SMS* messages. (SMS alerts may not be available in all countries)
Soak slide for 24 hours
Remember to always soak your seneye slide for a minimum for 24 hours before using it. Take a glass of water from your aquarium or pond and place the slide in. Soaking allows the sensor pad time to stabilise so accurate readings can be taken.
Tunze Co2 Pressure Reducer 7077/3
Precision device with fine adjustment for standard CO2 cylinders, thread in keeping with German standard DIN 477 (US version with CGA 320 thread). To be mounted without tools; precise adjustment; two pressure gauges; pressure-relief valve. Made in Germany.
Dennerle CO2 Night Cut-off Valve Comfort
For magnificent plant growth, DENNERLE recommends a CO2 content in the aquarium of approx. 20 mg/l.
As certain correlations apply between CO2 content, carbonate hardness (CH) and pH value, the CO2 content in the water can be calculated according to a simple procedure:
Measure the carbonate hardness of your aquarium water.
Read the pH value which corresponds to the desired CO2 content from the table. You should set this pH value +/- 0.1 by adjusting the number of bubbles accordingly. Example: Carbonate hardness 4 °d, recommended pH 6.8 +/- 0.1.
The procedure is even simpler with the DENNERLE CO2 long-term test Correct + pH.
$18.00Dymax Base Soil series decreases the hardness of the water and lower the pH level to the degree at which most aquatic plants can consume nutrients and comfortably grow. The soil granules maintain the shape and density underwater security good circulation of water oxygen through the substrate. With Dymax Base Soil, growing difficult plants become easier and it is ideal for fishes demanding soft water.
XStream-E Wave Pump
24V WAVE PUMP INCLUDING MINI CONTROLLER
CIRCULATION AND STREAM PUMP WITH ELECTRONIC CONTROL
XSTREAM-E incorporates the new DC technology and is ideal to be used in advanced marine tanks to create the most natural waves. An adjustable flow rate and 4 pre-set timing programs embody all what is needed for any easy and professional aquarium care.
DETAILS: The controller features 5 LED lights indicating both speed and 4 pre-set timing programs: