Reef Fusion 1™ and Reef Fusion 2™ are the foundation of a system formulated to provide the essentials for the reef aquarium. Reef Fusion 1™ provides calcium, while Reef Fusion 2™ provides alkalinity. When used together, the Reef Fusion™ system will maintain calcium and alkalinity levels.
Reef Fusion 1™ provides not only 100,000 mg/L of ionic calcium, but also includes biologically appropriate levels of magnesium, strontium, boron, iron, manganese, and molybdenum.
Reef Fusion 2™ contains a mixture of carbonates and bicarbonates at an alkalinity of 4400 meq/L. It is designed to restore and maintain alkalinity in the reef aquarium and provide calcareous species with the essential carbonate needed for growth.
When used as directed, Reef Fusion 1™ and Reef Fusion 2™ will maintain the critical levels of calcium and alkalinity necessary for healthy coral growth, while providing biologically appropriate levels of other elements and trace minerals.
Dose aquarium every 1-2 days. Shake well before using. Add 1 mL of Reef Fusion 1™ per 25 L (6.5 US gallons) of water. (For reference purposes, the cap holds 5 mL.) Add this to a high current area of the tank. Wait a few minutes, then add Reef Fusion 2™ in the same manner, 1 mL per 25 L (6.5 US gallons), after shaking well. It is preferred that the two products be added to separate locations in the tank. This dose contributes 4 mg/L of calcium, and 0.176 meq/L of alkalinity. Never mix Reef Fusion 1™ with Reef Fusion 2™ directly.
DO NOT EXCEED A DOSE OF 4 mL IN 25 L (6.5 US GALLONS) PER DAY OF EACH PRODUCT.
Maintain calcium level between 410-430 mg/L. Maintain alkalinity between 4-6 meq/L. Size or frequency of dose may be increased if dosing regimen is insufficient to maintain calcium and alkalinity in these ranges.
Ingredients: Calcium chloride, magnesium chloride, strontium chloride, rubidium chloride, sodium tetraborate, iron chloride, sodium molybdate, manganese sulfate
|Amounts per 1 g|
|Calcium (min)||95 mg|
|Calcium (max)||105 mg|
The AP9X Mounting Arm is a sleek, low profile mounting option designed for the new Kessil AP9X Controllable LED Light. The AP9X Mounting Arm allows the fixture to be mounted with just a single arm, providing maximum light spread with minimum intrusion on tank aesthetics. The mounting arm also includes an integrated swivel joint, giving you the ability to easily adjust and orient your light to eliminate shadowing. The unit can be adjusted in height and from back to front (for 18" - 24" wide tanks) and features internal cable management to route power cords through the arm for a flawless finish.
The AP9X is also backwards-compatible with all AP700 mounting options, including the Hanging Kit and two standard Mounting Arms.
Seachem Reef Reactor Lg
Reef Reactor™ is a high-purity source of aragonite, which supplies all important elements for optimal ionic balance and robust coral growth and coloration in reef aquaria. It has a grain size of approximately 1-3 cm. (Reef Reactor™ Md is 0.5 - 1 cm). It is intended for use in calcium reactors where it is dissolved slowly with the addition of CO2. As it dissolves, it provides calcium, magnesium, strontium, potassium, and carbonates among other important elements for reef aquaria. It is excellent at increasing and stabilizing alkalinity, which also supports a stable pH and encourages the rapid formation of coral skeletal material. With high levels of both calcium and magnesium, it offers an excellent means of balanced supplementation for rapid growth and propagation of corals and calcareous animals in reef aquaria. It possesses the highest level of soluble potassium of all competing brands while exhibiting the lowest levels of both aluminum and phosphorus.
Rinse Reef Reactor™ prior to initial placement in your calcium reactor. The rate of water flow through the reactor in conjunction with the pH of the water inside the reactor will control the rate of media dissolution. Follow the manufacturer’s instructions furnished with the calcium reactor and adjust the rates of water flow and CO2 injection to attain the desired concentrations of calcium and alkalinity in the effluent.
Use Seachem’s Reef Status™: Magnesium and Reef Status™: Calcium test kits to measure alkalinity, calcium, and magnesium concentrations.