KEEP OUT OF REACH OF CHILDREN. Not for consumption.
1. Add 2ml of water in the test vial.
2. Add 5 drops of the Cu reagent and swirl gently for 5 seconds.
3. Allow it to stand for 10 minutes. Some copper medications might use strongly bound copper and would require a waiting time of 20 minutes. In case of doubt compare the value after 10 and 20 minutes of waiting. The highest value should be noted.
4. To obtain the copper concentration hold the test vial in front of you. Place the white part of the color chart firmly against the side of the test vial and look from the opposite side.
A blue tinge lighter than the 0.1ppm value corresponds to approximately 0.05ppm.
A color in between two color bars indicates a copper value in between those two values.
|ml's Added||Copper Concentration in ppm|
Seachem Reef Reactor Lg
Reef Reactor™ is a high-purity source of aragonite, which supplies all important elements for optimal ionic balance and robust coral growth and coloration in reef aquaria. It has a grain size of approximately 1-3 cm. (Reef Reactor™ Md is 0.5 - 1 cm). It is intended for use in calcium reactors where it is dissolved slowly with the addition of CO2. As it dissolves, it provides calcium, magnesium, strontium, potassium, and carbonates among other important elements for reef aquaria. It is excellent at increasing and stabilizing alkalinity, which also supports a stable pH and encourages the rapid formation of coral skeletal material. With high levels of both calcium and magnesium, it offers an excellent means of balanced supplementation for rapid growth and propagation of corals and calcareous animals in reef aquaria. It possesses the highest level of soluble potassium of all competing brands while exhibiting the lowest levels of both aluminum and phosphorus.
Rinse Reef Reactor™ prior to initial placement in your calcium reactor. The rate of water flow through the reactor in conjunction with the pH of the water inside the reactor will control the rate of media dissolution. Follow the manufacturer’s instructions furnished with the calcium reactor and adjust the rates of water flow and CO2 injection to attain the desired concentrations of calcium and alkalinity in the effluent.
Use Seachem’s Reef Status™: Magnesium and Reef Status™: Calcium test kits to measure alkalinity, calcium, and magnesium concentrations.
$10.00* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.
$6.00* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.