Safe™ is the complete and concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and ammonia. Safe™ converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. Safe™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Safe™ is non-acidic and will not impact pH. Safe™ will not overactivate skimmers. Use at start-up and whenever adding or replacing water.
Use 200 mg Safe (scoop) per each 200 L (50 gallons) as needed to reduce chlorine and chloramine or per 50 L (13 gallons) for ammonia.
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
The AP9X Mounting Arm is a sleek, low profile mounting option designed for the new Kessil AP9X Controllable LED Light. The AP9X Mounting Arm allows the fixture to be mounted with just a single arm, providing maximum light spread with minimum intrusion on tank aesthetics. The mounting arm also includes an integrated swivel joint, giving you the ability to easily adjust and orient your light to eliminate shadowing. The unit can be adjusted in height and from back to front (for 18" - 24" wide tanks) and features internal cable management to route power cords through the arm for a flawless finish.
The AP9X is also backwards-compatible with all AP700 mounting options, including the Hanging Kit and two standard Mounting Arms.
Seachem Reef Reactor Lg
Reef Reactor™ is a high-purity source of aragonite, which supplies all important elements for optimal ionic balance and robust coral growth and coloration in reef aquaria. It has a grain size of approximately 1-3 cm. (Reef Reactor™ Md is 0.5 - 1 cm). It is intended for use in calcium reactors where it is dissolved slowly with the addition of CO2. As it dissolves, it provides calcium, magnesium, strontium, potassium, and carbonates among other important elements for reef aquaria. It is excellent at increasing and stabilizing alkalinity, which also supports a stable pH and encourages the rapid formation of coral skeletal material. With high levels of both calcium and magnesium, it offers an excellent means of balanced supplementation for rapid growth and propagation of corals and calcareous animals in reef aquaria. It possesses the highest level of soluble potassium of all competing brands while exhibiting the lowest levels of both aluminum and phosphorus.
Rinse Reef Reactor™ prior to initial placement in your calcium reactor. The rate of water flow through the reactor in conjunction with the pH of the water inside the reactor will control the rate of media dissolution. Follow the manufacturer’s instructions furnished with the calcium reactor and adjust the rates of water flow and CO2 injection to attain the desired concentrations of calcium and alkalinity in the effluent.
Use Seachem’s Reef Status™: Magnesium and Reef Status™: Calcium test kits to measure alkalinity, calcium, and magnesium concentrations.