BIO-Cubes are made from 100% biologically degradable polymers that effectively remove both nitrates and phosphates from both marine and freshwater systems. BIO-Cubes have a very high surface area and contains 400% more carbohydrates than any other brand, making it the best product of its kind in the world. Independent testing in real world scenarios, have proven BIO-Cubes to far outperform all other competing products. No other product of its kind can compare with the explosive performance that BIO-Cubes can offer. BIO-Cubes are very versatile and can be used in filter bags, fluidized reactors and denitrators. BIO-Cubes require no maintenance and require no feeding dosages making it the easiest and most convenient nitrate and phosphate removing product on the market. Nitra-Guard BIO-Cubes comes with a free filter bag with every jar (excluding 5000ml size).
How it all works
Bacteria consume the high carbohydrate source found in the BIO-Cubes and form a biomass that absorbs nitrates and phosphates from the water in the aquarium. This biomass is then skimmed out with a protein skimmer or is consumed as a food source by corals and clams.
When culturing bacteria, 2 of the most important factors that will determine the size of the colony are surface area and food source. BIO-Cubes look like small open celled sponges giving the product a massive surface area. BIO-Cubes also has 400% more biologically available, insoluble polymer carbohydrates than any other product in the world. These 2 factors create conditions that are perfect for culturing and sustaining large bacteria colonies required to effectively remove phosphate and nitrate from aquariums. It is these 2 factors that have made Nitra-Guard BIO-Cubes the world's best carbohydrate based nitrate removing media. Independent tests that were performed in real world scenarios revealed that BIO-Cubes had the ability to reduce nitrates from 60ppm down to 5ppm in under 2 weeks while competing products claim to only start working after 2 weeks!
Directions for use
The amount required will depend on stocking densities and amount of food added to the aquarium. For heavily stocked tanks, use 3ml to every 1liter of aquarium water and for aquariums with lighter stock loads, add 1ml to every 1liter of aquarium water.
The Nitra-Guard BIO-Cubes work best in an oxygen-rich environment with good waterflow. To get the best results, the Bomb Method as described in the instructions can be used. The BIO-Cubes can also be used in a media reactor or a filter media bag and placed near the protein skimmer to assist in removing the nitrate/phosphate-rich biomass faster. If using the Nitra-Guard BIO-Cubes in a reactor, make sure the reactor can be fitted with a venturi to provide sufficient oxygenation to the BIO-Cubes. After 1 to 2 weeks, the bacteria colonies will become prolific enough to start lowering nitrate levels in your aquarium. If nitrate and phosphate levels in your aquarium are high, some cloudiness may occur which clears in a few days. Soak BIO-Cubes in freshwater for 24hrs before use.
Seachem Reef Reactor Lg
Reef Reactor™ is a high-purity source of aragonite, which supplies all important elements for optimal ionic balance and robust coral growth and coloration in reef aquaria. It has a grain size of approximately 1-3 cm. (Reef Reactor™ Md is 0.5 - 1 cm). It is intended for use in calcium reactors where it is dissolved slowly with the addition of CO2. As it dissolves, it provides calcium, magnesium, strontium, potassium, and carbonates among other important elements for reef aquaria. It is excellent at increasing and stabilizing alkalinity, which also supports a stable pH and encourages the rapid formation of coral skeletal material. With high levels of both calcium and magnesium, it offers an excellent means of balanced supplementation for rapid growth and propagation of corals and calcareous animals in reef aquaria. It possesses the highest level of soluble potassium of all competing brands while exhibiting the lowest levels of both aluminum and phosphorus.
Rinse Reef Reactor™ prior to initial placement in your calcium reactor. The rate of water flow through the reactor in conjunction with the pH of the water inside the reactor will control the rate of media dissolution. Follow the manufacturer’s instructions furnished with the calcium reactor and adjust the rates of water flow and CO2 injection to attain the desired concentrations of calcium and alkalinity in the effluent.
Use Seachem’s Reef Status™: Magnesium and Reef Status™: Calcium test kits to measure alkalinity, calcium, and magnesium concentrations.
$10.00* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.
$6.00* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.