Seachem Flourish Nitrogen
Nitrogen is one of the main three macro nutrients (nitrogen, phosphorus, potassium: NPK) required by plants and can often become the limiting factor to growth in a ﬂourishing system. Flourish Nitrogen™ is a concentrated (15,000 mg/L) blend of nitrogen sources. It provides nitrogen in both the nitrate form and the plant–preferred ammonium form. However, no free ammonia is released because the ammonium in Flourish Nitrogen™ is complexed and unavailable until utilized by the plants. Flourish Nitrogen™ also provides nitrate for those plants that can readily utilize nitrate as well. For maximum benefit, use with Flourish Phosphorus™ and Flourish Potassium™. Flourish Nitrogen™ is safe for invertebrates such as shrimp.
BEGINNER: Use 2.5 mL (half a cap) for each 160 L (40 US gallons) twice a week or as needed in response to signs of nitrogen deficiency (e.g. stunted growth, chlorosis). For smaller doses, please note that each cap thread is approximately 1 mL.
EXPERT: The beginner dose raises nitrogen by the same degree that 1 mg/L nitrate would. This dose is sufﬁcient to provide approximately 4 g of growth (dry) or about 20 g (hydrated) over a 1 month period (assuming all other necessary nutrients are provided). For increased growth use proportionately more.
To target a speciﬁc nitrogen increase, dose according to the following formula: 0.25vn=m, where v= volume of tank in gallons, n=desired nitrogen increase (if using a “nitrate equivalent” value for “n” then use a factor of 0.05 instead of 0.25 in the formula) and m=volume of product to use in mL. For example to raise 20 gallons by 0.20 mg/L nitrogen you would use: 0.25*20*0.20=1 mL.
Because one-half of the nitrogen in Flourish Nitrogen™ is from nitrate you can get a reasonable estimate of nitrogen levels by doubling a nitrate reading.
Derived from: potassium nitrate, urea (iminium salt)
|Total Nitrogen (N)||1%|
|Soluble Potash (K2O)||2%|
Seachem Reef Reactor Lg
Reef Reactor™ is a high-purity source of aragonite, which supplies all important elements for optimal ionic balance and robust coral growth and coloration in reef aquaria. It has a grain size of approximately 1-3 cm. (Reef Reactor™ Md is 0.5 - 1 cm). It is intended for use in calcium reactors where it is dissolved slowly with the addition of CO2. As it dissolves, it provides calcium, magnesium, strontium, potassium, and carbonates among other important elements for reef aquaria. It is excellent at increasing and stabilizing alkalinity, which also supports a stable pH and encourages the rapid formation of coral skeletal material. With high levels of both calcium and magnesium, it offers an excellent means of balanced supplementation for rapid growth and propagation of corals and calcareous animals in reef aquaria. It possesses the highest level of soluble potassium of all competing brands while exhibiting the lowest levels of both aluminum and phosphorus.
Rinse Reef Reactor™ prior to initial placement in your calcium reactor. The rate of water flow through the reactor in conjunction with the pH of the water inside the reactor will control the rate of media dissolution. Follow the manufacturer’s instructions furnished with the calcium reactor and adjust the rates of water flow and CO2 injection to attain the desired concentrations of calcium and alkalinity in the effluent.
Use Seachem’s Reef Status™: Magnesium and Reef Status™: Calcium test kits to measure alkalinity, calcium, and magnesium concentrations.
$10.00* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.
$6.00* Delivery service provided within Singapore Only. International Sales not applicable for all Live Stocks sold by FNM.