Ultra-activated Phosphate-adsorption Media with Superior Performance Characteristics
Instructions and Guidelines
Read all instructions before use. The use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will improve efficiency. Rinse Xport-PO4 in purified water or low-TDS fresh water, then place media into a clean pail and fill with water from the aquarium into which the media is to be placed. At an initial phosphate concentration of 1 ppm or less, 350 g of Xport-PO4 is capable of extracting ~10.5 g of phosphate; this equates to 1 g of Xport-PO4 per 396 US-gallons (1,500 L) to eliminate 0.02 ppm phosphate. Replace media when phosphate concentration ceases to decrease (if greater than 0 ppm) or begins to increase. In low-nutrient aquaria, it is not uncommon for several months to pass before the media has become exhausted. If corals or other invertebrates appear to react negatively to the use of the media, it may be an indication that reactive phosphate is being removed too aggressively; decrease amount used by 50% and continue use until phosphate concentration appears to be immeasurable. The most efficient use of Xport-PO4 will rely upon regular testing for phosphate with an accurate test kit to ensure that the mass of media being employed is suitable for the system requirements.
A flow-through rate of 1 - 3x the total aquarium volume per hour is recommended. Do not fluidize; fluidization serves to decrease filtration efficiency and may cause gradual deterioration of the material, potentially resulting in dispersal of harmless, but unattractive, dust throughout the system. Canister filtration: Load Xport-PO4 into filter cartridge as directed by filter manufacturer. Passive filtration: Place Xport-PO4 loosely in an 800µm mesh filter bag and locate in an area of low- to medium-flow. Media reactors: If placing Xport-PO4 into a media reactor, ensure that the media remains "static" and non-moving.
BorneoWild Enlive Shrimp Conditioner 100g
Enlive is a multi-purpose culture of more than 100 types of bacterial in dormant state. It helps to seed a new tank substrate system quickly as well as in new filters when dosed into water directly. It replenishes bacterial losses after a regular water change, purifies water by decomposing ammonia and nitrite.
For setting up as substrate additive, spread 6 spoon for a 60x45cm tank. For replenishing bacterial lose after water change, mix 1 spoon of ENLIVE in a mug of tank water for every 200L water.
The Seachem Algae Scraper is designed with versatility in mind. With three retractable blades: metal, plastic, and soft pad, it is suited for both glass and acrylic aquariums. It is lightweight and features an ergonomic handle making it comfortable to hold in multiple positions. In addition, it floats for easy retrieval. Finally, its white color makes it easy to see the algae you want to remove and when you’ve effectively removed it.
Sizes: 12 inches (31 cm), 18 inches (46 cm)
Easily removes tough algae in glass aquariums. Not for use on acrylic.
Safe for use on glass and acrylic. Use care at gravel line to avoid scratching acrylic
Your first choice for acrylic aquariums. Easily removes algae from scratches
$26.00The Dymax water scissors are made from stainless steel mattensite 420 (Martensitic 420), which is the same grade as stainless steel used in the manufacture of medical devices. The product is anodic oxide, which gives the scissor's surface a black finish to enhance its durability. No corrosion