Clarifier for ponds and water gardens
If water is discolored (e.g. yellow or tea-stained due to excessive dissolved waste), use Brightwell Aquatics FlorinBac-S or FlorinBac-W (depending upon season); allow 24-hours after adding FlorinClear before dosing with FlorinBac-S or FlorinBac-W.
Flocculation of cloudiness initially caused by blooms of microalgae may result in a depressed pH; therefore, ensure that alkalinity (“carbonate hardness”) measures at least 2 dKH prior to use and do not apply FlorinClear after sun down. If cloudy water reoccurs within 72 hours of applying FlorinClear, then this is an indication that pond husbandry practices may require modification. While FlorinClear offers a rapid solution to decrease water cloudiness, it should not be seen as an alternative to long-term proper and sensible pond husbandry. If conditions within the pond encourage chronic events of water cloudiness, then it will become necessary to determine, and subsequently address, the cause(s). Oftentimes, the use of an effective and well-maintained mechanical filter will help control water cloudiness; additionally, feeding pond inhabitants sensibly, limiting the use of organic-based supplements and additives, regular testing of important water parameters with accurate kits and/or meters, and performing water changes/replacing evaporation with nitrate- and phosphate-free water are all important aspects of pond husbandry.
Caution: Do not use at night. Keep out of reach of children. Not for human consumption.
Instructions and Guidelines
Do not use after sun down. Shake product well before using. Replace or rinse mechanical filtration material prior to use. After application of FlorinClear, mechanical filtration media will gradually begin to clog as the particles responsible for causing the initial cloudiness are trapped. When the flow rate of water through the filter seems to have slowed significantly, or water is pooling on top of the filter pad, replace or rinse the filtration media and repeat as necessary. Do not “free pour” FlorinClear into pond, which may result in excessive, persistent cloudiness.
Recommended dosage is 5 capfuls (25-ml) of FlorinClear per 50 US-gallons in pond or water garden. In a clean plastic jug, dilute up to 5 capfuls of FlorinClear per quart of water from the pond or water garden, and stir to mix; with water pumps running, gradually pour the mixture into the pond in an area of rapid water flow. Allow at least 12-hours for flocculation process to complete; re-apply in 24-hours if necessary. Maximum recommended usage is twice per 5 day period. Operate pumps for at least 24-hours following dosing to ensure adequate oxygenation and flocculation.
The Fluval FX series stands for high-performance and reliability. Made in Italy, the FX4 canister filter is a compact counterpart of the FX6. FX4 is suitable for those upgrading from Fluval 406. Fluval FX4 is recommended for both freshwater and saltwater aquariums up to 1000 L (250 US Gal).
Easy to Use & Maintain
$19.30Kent Zoe is a superior vitamin complex for Marine Fish, Invertebrates, and desirable algae. (Zoe does not contain phosphates as most competing vitamin supplements do, and will not cause unsightly algae growth!) It contains aquaculture grade vitamins, meaning that they are still active after one year in your aquarium! It is unique because it also contains natural minerals from spirulina and kelp sources. Competing products are preserved with glycerin, which is an alcohol and requires 50% concentration to preserve. Zoe is properly preserved, using less than ½% preservatives, yet has a 4 year shelf life with no refrigeration. Just smell the difference!
Features & Benefits
GENTLY MIXES YOUR CALCIUM HYDROXIDE
Kalk Stirrer (Nilsen Reactor) carries a high torque, low RPM and low voltage motor, that not only gently mixes your calcium hydroxide (kalkwasser), it is also one of the quietest in the market.
This method is not only ideal but is also the safest way of introducing the freshest kalkwasser to a reef system. Our Kalk Stirrer is designed to keep the undissolved particles at the bottom of the reactor chamber while always leaving the clear, highly saturated kalkwasser liquid at the top. Adding kalk powder is easy with just a few twists of the large thumb screws releasing the seal-tight lid for quick and easy refills.
NO NEED FOR PESKY POWERHEADS
With the built in Power Head, matched to the exact specification of our Kalkwasser Reactor, there is no need for frequent cleaning, and no more risky dosing with large vats of lime water which take up valuable space. There is no need for premixing or worry about clogging when using our innovative and efficient Kalk Stirrer (Nilsen Reactor) which are extremely easy to use and salt-water safe, making them simply the most economical and best kalk reactor in the market.
* Please do not run the Kalk Stirrer unit continuously.
For tanks up to 400L, maximum flow rate 880L/H, maximum head height 0.8m.
Features & Benefits
Our Bio Churn reactors are for those that demand the ultimate control over your Bio pellets solid carbon dosing. The superior “Churn” Style” design easily fluidizes large amounts of bio pellet media without blasting it with outrageous flow just to fluidize the media, which is a commonly found on other Bio Pellet reactors in the market today.
The unique motion these innovative reactors produce allow for much greater suspension of the media in a cyclone “churn” style motion created with our patent pending churn plate. Equipped with our very own Aquatrance recirculation pumps which features independent flow valves, so the user can independently control the flow of media within the reactor.
Our Bio Churn Reactors come in four Series including the in-sump, External/Recirculating and the Commercial line. For the ultimate control of PO4 & NO3 look no further than the Bio Churn.