Sulawesi Mineral 7.5 is the most easily soluble variant of our Sulawesi Mineral scope. It buffers the pH at around 7.5 and serves for mineralising RO water, rainwater, fully desalinated water etc.
Sulawesi Mineral 7.5 contains all important minerals and trace elements the well-known shrimp species from this region need for their health, wellbeing and colouration. Cardinal shrimp (Caridia dennerli) breeders have been using it very successfully. This mineral salt furthers the microbial regeneration of biological filter substrates. Raises carbonate and total hardness at a ratio of KH/°dH = 0.42/1.0.
Instructions of use: Add Sulawesi Mineral 7.5 to water outside of your aquarium. It will almost totally dissolve within seconds, and the water is ready for use immediately. We recommend adapting the temperature of the new water to that in your tank. Please make sure to add any undissolved particles to your tank, too. Close the container after every use.
Dosage: RO water, rainwater, fully desalinated water etc. is remineralised with Sulawesi Mineral 7.5 until a hardness of around 6 °dH and/or a conductance of around 270 +/- 40 µS (Mikrosiemens) is reached. This corresponds to a slightly heaped measuring spoon (around 3.5 g) to 15 litres of water.
Measuring spoon enclosed.
The AP9X Mounting Arm is a sleek, low profile mounting option designed for the new Kessil AP9X Controllable LED Light. The AP9X Mounting Arm allows the fixture to be mounted with just a single arm, providing maximum light spread with minimum intrusion on tank aesthetics. The mounting arm also includes an integrated swivel joint, giving you the ability to easily adjust and orient your light to eliminate shadowing. The unit can be adjusted in height and from back to front (for 18" - 24" wide tanks) and features internal cable management to route power cords through the arm for a flawless finish.
The AP9X is also backwards-compatible with all AP700 mounting options, including the Hanging Kit and two standard Mounting Arms.
Seachem Reef Reactor Lg
Reef Reactor™ is a high-purity source of aragonite, which supplies all important elements for optimal ionic balance and robust coral growth and coloration in reef aquaria. It has a grain size of approximately 1-3 cm. (Reef Reactor™ Md is 0.5 - 1 cm). It is intended for use in calcium reactors where it is dissolved slowly with the addition of CO2. As it dissolves, it provides calcium, magnesium, strontium, potassium, and carbonates among other important elements for reef aquaria. It is excellent at increasing and stabilizing alkalinity, which also supports a stable pH and encourages the rapid formation of coral skeletal material. With high levels of both calcium and magnesium, it offers an excellent means of balanced supplementation for rapid growth and propagation of corals and calcareous animals in reef aquaria. It possesses the highest level of soluble potassium of all competing brands while exhibiting the lowest levels of both aluminum and phosphorus.
Rinse Reef Reactor™ prior to initial placement in your calcium reactor. The rate of water flow through the reactor in conjunction with the pH of the water inside the reactor will control the rate of media dissolution. Follow the manufacturer’s instructions furnished with the calcium reactor and adjust the rates of water flow and CO2 injection to attain the desired concentrations of calcium and alkalinity in the effluent.
Use Seachem’s Reef Status™: Magnesium and Reef Status™: Calcium test kits to measure alkalinity, calcium, and magnesium concentrations.