A filtering media consisting of specific resins which adsorb phosphates and silicates found in fresh and saltwater aquariums and do not release the adsorbed substances in the water. It is recommended that phosphate concentration in freshwater aquariums does not exceed 0.3 mg/l as this promotes the ideal conditions for algae growth, whereas in saltwater aquariums it is highly recommended that the phosphate concentration does not exceed 0.1 mg/l otherwise this condition affects the natural process of calcium absorption by organisms in the aquarium which require this vital substance such as red coralline algae, hard corals.
Fill a fine mesh bag with the product, rinse under running water for approximately 3 minutes and position in the biological filter preferably located underneath the recirculation pump so that the water passes through it completely or position the bag with the product in the external filter. NO PHOSPHATES can be also placed in a fluidised bed filter in saltwater aquariums fitted with this system, in this way the product is continuously moved by the constant water flow.
250 ml of product is sufficient for 1000 litre freshwater aquariums and 500 litre saltwater aquariums, 125 ml of product is sufficient for 500 litre freshwater aquariums and 250 litre saltwater aquariums. When to replace this filter media depends on the quantity of phosphates and silicates in the water, however it is recommended to replace with new media every four months. There are no adverse effects in the event the recommended dosage is exceeded.
The HydroTote™ is a collapsible jug that holds up to 20 L (5 gallons) in the new size. It's perfect for customers that get their saltwater, RO water, or DI water at their local fish store. When not in use, it easily folds up to take up less space. It pours easily and can withstand a drop of up to 3 meters while full.
Dealers asked for it, and Seachem delivered. HydroTote™ is the ideal space saving alternative for shops carrying current 5 gallon hard jugs that simply consume too much space in the home, office, or pet store.
20 L (5 US gallons)
Safe™ is the complete and concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and ammonia. Safe™ converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. Safe™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Safe™ is non-acidic and will not impact pH. Safe™ will not overactivate skimmers. Use at start-up and whenever adding or replacing water.
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
Download detailed product information and instructions in English HERE.
If you need to create a moss wall effect for your favourite betta, shrimp, or just want a moss wall in your favourite tank, then look no further! 3D printed with aquarium safe materials and secured on with industrial suction cups, the 4-inch moss wall planter is sure to impress. No more flimsy moss walls.
Products are made with aquarium safe PLA plastics and attached with industrial grade suction cups.