Automate freshwater replenishment, and say farewell to heavy lifting, unstable water parameters, and the need to frequently watch your water line.
Topping off evaporated water for our aquariums is a tedious but essential task that every hobbyist encounters to maintain stable specific gravity & salinity levels.
The HydroFill ATO Controller System takes advantage of your water's conductive properties to complete a low voltage circuit and cause a control relay to actuate and replenish water as it evaporates. This departure from outdated float sensors, offers the latest automation in electronic sensing for precise accuracy, repeatability, and no-moving part reliability.
Customize your own "High and Low" set points to prevent constant On/Off cycling prone to single sensor design.
Sensors utilize rare earth neodymium magnets for stationary placement and simple out of the box installation. Small form factor makes it the ideal choice for nano to full size aquariums. Two chemically inert graphite electrodes are housed in each sensor for redundancy & consistent long-term performance in harsh marine environments.
-2 Year Warranty
-For use in Fresh & Marine Applications
-Controller Dims: 3.35 x 1.18 x 5.12
-Includes Double Sided Adhesive
-1000W, 8Amp/120V Pump Capacity
-Power Consumption: 1 Watt
-Visual LED indicators
a. Power -Red
b. Level - Green
c. Low Level ± Green
d. Water Filling ± Pulsing Green
-Small Form Factor: 0.91 x 1.06 x 2.64
-(2) Sensor Design
-Safe 5V Low Voltage
-6 foot sensor cables
-(2) Rare Earth Neodymium Magnetic Sensor Holders
-Chemically Inert Graphite Electrodes
The HydroTote™ is a collapsible jug that holds up to 20 L (5 gallons) in the new size. It's perfect for customers that get their saltwater, RO water, or DI water at their local fish store. When not in use, it easily folds up to take up less space. It pours easily and can withstand a drop of up to 3 meters while full.
Dealers asked for it, and Seachem delivered. HydroTote™ is the ideal space saving alternative for shops carrying current 5 gallon hard jugs that simply consume too much space in the home, office, or pet store.
20 L (5 US gallons)
Safe™ is the complete and concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and ammonia. Safe™ converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. Safe™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Safe™ is non-acidic and will not impact pH. Safe™ will not overactivate skimmers. Use at start-up and whenever adding or replacing water.
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
Download detailed product information and instructions in English HERE.
If you need to create a moss wall effect for your favourite betta, shrimp, or just want a moss wall in your favourite tank, then look no further! 3D printed with aquarium safe materials and secured on with industrial suction cups, the 4-inch moss wall planter is sure to impress. No more flimsy moss walls.
Products are made with aquarium safe PLA plastics and attached with industrial grade suction cups.