E.S.V. B-Ionic Seawater System Salt Mix 200 gallon
A unique solution to many of the problems associated with all dry synthetic seawater blends.
All dry blends may not be homogenous resulting in considerable chemical variations not only from batch to batch but also from within the same container. Aggravating this further, humidity contamination during storage can result in localized precipitation reactions.
B-Ionic Seawater System avoids these problems by providing the two dominant salts in our formulation in separate containers. All other major, minor, and trace elements are pre-dissolved in a highly concentrated two component liquid system. These dry and liquid components can easily be measured for any size batch of synthetic seawater.
It is now recognized that most reagent grade salts can contain contaminants (trace metals, etc.) at levels which may inhibit the growth of some algae species from low nutrient environments (oligotrophic) such as coral reefs.
B-Ionic Seawater System addresses this issue by providing ultra-low heavy metal Sodium Chloride (max. allowable less than half max. allowable for reagent grade sodium chloride) and USP grade Magnesium Sulfate as the dry components of the system. In addition, all other chemicals pre-dissolved in our liquid components are subject to our three phase purification process resulting in significant lowering of contaminants, including phosphate.
Many all dry blends take excessive time to completely dissolve. Addition of newly mixed batches to the aquarium can cause irritation to inhabitants upon exposure to non-dissolved salt micro-particles.
B-Ionic Seawater System avoids this problem by providing all of the slower dissolving ingredients in a pre-dissolved solution form. Batches can be used within 10 minutes of preparation with no adverse effects providing initial RO and/or DI water contains sufficient dissolved oxygen.
Tunze Co2 Pressure Reducer 7077/3
Precision device with fine adjustment for standard CO2 cylinders, thread in keeping with German standard DIN 477 (US version with CGA 320 thread). To be mounted without tools; precise adjustment; two pressure gauges; pressure-relief valve. Made in Germany.
Dennerle CO2 Night Cut-off Valve Comfort
For magnificent plant growth, DENNERLE recommends a CO2 content in the aquarium of approx. 20 mg/l.
As certain correlations apply between CO2 content, carbonate hardness (CH) and pH value, the CO2 content in the water can be calculated according to a simple procedure:
Measure the carbonate hardness of your aquarium water.
Read the pH value which corresponds to the desired CO2 content from the table. You should set this pH value +/- 0.1 by adjusting the number of bubbles accordingly. Example: Carbonate hardness 4 °d, recommended pH 6.8 +/- 0.1.
The procedure is even simpler with the DENNERLE CO2 long-term test Correct + pH.
$18.00Dymax Base Soil series decreases the hardness of the water and lower the pH level to the degree at which most aquatic plants can consume nutrients and comfortably grow. The soil granules maintain the shape and density underwater security good circulation of water oxygen through the substrate. With Dymax Base Soil, growing difficult plants become easier and it is ideal for fishes demanding soft water.
XStream-E Wave Pump
24V WAVE PUMP INCLUDING MINI CONTROLLER
CIRCULATION AND STREAM PUMP WITH ELECTRONIC CONTROL
XSTREAM-E incorporates the new DC technology and is ideal to be used in advanced marine tanks to create the most natural waves. An adjustable flow rate and 4 pre-set timing programs embody all what is needed for any easy and professional aquarium care.
DETAILS: The controller features 5 LED lights indicating both speed and 4 pre-set timing programs: