Reef•Basis Iron is a high quality, bio-available, chelated iron complex designed to safely raise the iron level in marine aquariums, providing essential iron for increased growth rates in caulerpa, coralline algae, other calcareous marine algae and many other marine organisms. It contains no gluconates, or polygluconates. It is phosphate and nitrate free and contains no fertilizers that could cause unwanted hair algae growth.
Iron is crucial for photosynthesis in all plants, including caulerpa, mangroves, calcareous algae, and symbiotic algae in coral, marine clam and other invertebrate tissues. In marine aquariums, iron is used up rapidly and removed through precipitation. Reef•Basis Iron is chelated with EDTA, a professional sequestrant that will allow it to remain soluble until used by the life that requires it. Growth of all photosynthetic organisms also require strong lighting of proper spectrum. Consult your lighting supplier for assistance in the proper type of light, and photo periods for the corals and algae that you are growing.
Shake well prior to use. Add 1 capful (5 ml) per 50 US-gallons (200 L) of marine aquarium water 3 to 4 times per week. If measuring the iron concentration, add as required to maintain the concentration between .04 and .10 mg/L.
Dosing through use of a drip system is a superior method of addition. Do not mix with buffers or alkalinity supplements prior to addition. You may mix it with strontium, magnesium, and many other supplements. See our website for compatibility of supplements. Determine the amount of iron consumption during the time it takes add the entire volume of your drip system. Determine the amount of Reef•Basis Iron to add in milliliters by multiplying your tank capacity in gallons by the amount you want to raise it in mg/l (ppm) and by 1.0. (Example: if you have a 100 gallon tank and you want to raise the level by .05 ppm with the entire dose, you would multiply 100 x .05 x 1.0 which equals 5 ml of Reef•Basis Iron or 1 capful).
Caution: Keep out of reach of children. Not for human consumption. Contains Iron EDTA, If ingested drink water, contact a poison control center. If in eyes flush with water.
The Comline® DOC Skimmer 9004 DC is designed for use in seawater from 60 to 300 liters (15 to 79 Gal). It operates according to the TUNZE® flash skimming principle and acquires the water through an efficient surface suction with a surface film removal, and can therefore also be used as a "stand-alone" solution in the aquarium. The TUNZE® Foamer generates large volumes of fine air bubbles with a diameter of between .1 and .3 mm (.004 - .012 in.) and is especially quiet during operation.
The Comline® DOC Skimmer with a magnet holder for glass up to a thickness of 12 mm (1/2") is supplied installation-ready.
Air flow regulation and silencer
for an exceptionally quiet
Simple, quiet and effective - these are the current demands towards aquarium components. That is precisely what distinguishes the small Comline® DOC Skimmer 9001 DC - a true "plug and play" skimmer for small seawater aquariums with 20 to 146 liters (5.3 to 37 USgal.). There is no complicated setting or regular adjustment required for the operation. A simple installation into a corner of the aquarium is sufficient and it will work autonomously.
Warranty: 1 year by FNM (Authorized Tunze Wholesaler)
$30.00Treats Fish Infections caused by Bacteria, like "Hole in the Head", PopEye, Hexamita, Fin & Tail Root, Septicemia, Dropsy, Ulcers, Mouth Fungus and many others.
$30.00Treats Ich, Brooklynella, Uronema, Crypto, Oodinium and many more parasites.