Proper pH 7.0 is a pH adjuster and stabilizer (buffer) for freshwater aquariums. Proper pH 7.0 neutralizes chlorine, detoxifies heavy metals, and adds electrolytes to the aquarium. The product also contains Aloe Vera, a proven natural stress reducer and healing agent for tropical fish. A pH of 7.0 is ideal for a community aquarium.
Proper pH 7.0 is formulated to lock the pH at 7.0. Buffers compensate for fluctuations in pH, automatically adjusting the pH to the predetermined level. Proper pH 7.0 will lower or raise the pH until 7.0 is reached. pH will not rebound to the original level. It may require more than one dose to adjust the pH. This is because carbonates (KH) in the water work against pH adjustment.
Directions For Use:
Proper pH 7.0 is for freshwater aquariums only. Proper pH 7.0 is a phosphate buffer and should not be used with live aquatic plants. If the aquarium water has a general hardness (GH) level above 200 ppm a haze can form in the water. This haze is the precipitation of some of the mineral salts. It is non-toxic and will be filtered out by most aquarium filters. This haze can be avoided by first softening aquarium water with API’s Water Softener Pillow.
Use the Water Softener Pillow to reduce water hardness, thus preventing mineral haze and permitting easy pH adjustments to 7.0. Use API’s GH Test Kit to measure water hardness.
Ideal For Direct Fed Coral
A nutrient package that stimulates feeding response.
Mix two parts tank water to one part Coralific Delite™ to form a gel. Wait 3 minutes to set then use a dropper to place mixture on the mouth of the coral to be fed.
Ideal for many LPS (large polyp stony corals) and sea anemone which have larger mouths.
Squirt & Go™ Feeding
Mix four parts tank water to one part Coralific Delite™ to form a low viscosity liquid with a creamy texture. Use a dropper to squirt food with a slow motion in the vicinity of the corals to be fed. The viscosity can be adjusted by increasing or decreasing the amount of tank water.
|We recommend Hikari Marine CORALIFIC DELITE as a daily diet for|
|Soft corals like horny coral and feather dusters which have a smaller mouth.|
|Crude Protein||Crude Fat||Crude Fiber||Moisture||Ash||Phosphorus|
|min. 42%||min. 13%||max. 5%||max. 10%||max. 14%||min. 1%|
Ideal for soft water aquariums. Ready-to-use pouch contains resins to remove calcium, magnesium and soluble heavy metal ions, including copper and iron. May be recharged for multiple uses.
For up to 75L.
Upgrade your Ecotech Marine Radion XR30 Light!
Even Spread & Coloration
Once you put the XR30 Diffuser on your Ecotech Radion LED light you will instantly see a better balance of light throughout your aquarium. PAR tests have proven that even though the overall peak PAR numbers will decrease, the lower light areas will actually receive more light from a diffused source. The overall light loss is around 20%, and since a majority of us do not use even 80% of the available lighting output, the PAR loss can be combatted by increasing the overall power delivered to the LEDs.
Increased Spectrum Blending
Diffusing LED lights greatly helps blend the overall spectrum into one cohesive light source. Traditionally aquarium LEDs have used optics to increase the penetration of the light, but doing so actually makes each LED into its own little spotlight, making it harder for colors to blend. With the overall amount of light available in modern reef tank LEDs, more power is not exactly the best thing, and throughout our testing, we have found that evenly spread light that is blended properly is more important for coral health and growth.
LED lights are known for producing a lot of shimmer, also known as the "disco-ball effect" and the Ecotech Radion Diffuser directly attacks this problem head-on. With the overall goal being to mimic the natural sunlight or metal halide shimmer effects, the XR30 Diffuser is not perfect, but it gets much closer than almost any LED available today.
Installation only takes a few minutes, and by unscrewing the bottom plate with a Phillips screwdriver, you can then attach the mounting adapter plate. The diffuser lens will then magnetically attach to the adapter plate. The magnetic attachment makes the diffuser lens very easy to clean
Dimensions - 11.75" x 7" x 0.625"
The HI747-25 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Copper Low Range Checker® HC. These reagents follow the Bicinchoninate Method in which the reaction between copper and the reagent causes a purple tint in the sample. By simply adding the packet of HI747-25 reagent to the sample, the reaction will take place and the HI747 will determine the concentration from the color that is produced. The results will be displayed in ppb of copper. These reagents are designed to be used with samples that have an expected range of 0 to 999 ppb copper.