Light source plays an important role in photosynthetic and a clear water surface will definitely help in light penetration. ISTA surface skimmer is the best devise to remove all the pollutants on the water surface.
Allow water inflow from all directions at skimmer inlet without clogging, and easy for cleaning.
With patented self-floating design, skimmer inlet can automatically adjust itself according to water level.
Floating level of the top water intake could be also adjusted.
With ISTA Surface Skimmer, you could be assured to have a crystal clear water surface.
How to use
It can be connected with hand on filter and canister filter submersible pump which efficiently removes the organism and the protein floats on water surface.
Effectively remove organism and protein floats for a clear water surface.
Increase photosynthesis, oxygen exchange and light penetration.
Patented self-floating inlet will automatically adjust itself according to water level.
Suitable with hang-on filters and external filters.
Needed to be connected with external filter or submersible filter to promptly filtrate the organism on the water surface.
To adjust the surface water flow rate, simply rotate the pole for adjustment.
Effectively removes the surface film and have a crystal clear water surface in order to improve oxygen exchange.
Sermicircle design, does not occupy the space.
Inlet valve allows easy adjusting water flow and with self-floating design, skimmer inlet can automatically adjust itself according to water level.
Suitable with small tank, hang-on filters and canister filters.
Design for disassembly, easy to install and clean.
Removes surface- dust/muck & protein.
For freshwater and marine aquarium.
Helps improve water circulation.
Dymax Water Surface Skimmer is an excellent tool for aquariums with circulation problems, water movement and dust/oil film collection on the surface. Thanks to its design, it helps to eliminate the unwanted film that forms in the water of the aquarium. It can be used in both freshwater and saltwater aquariums. Just connect the device to the water flow of your filter.
Tom Aquatics Aquarium Surface Skimmer
SurfClear Surface Skimmer
The aquarium water surface may develop unsightly oil slicks due to fish waste, uneaten feeds and dirty air. Oil slicks reduce the amount of gas exchange at the water surface and the air above, which will reduce the amount of oxygen in the water. Oil slicks also cause reductions in light penetration into the water. The OF Surf Clear Aquatic Surface Skimmer can effectively remove any oil slicks and keep the water surface clean and clear.
Designed to attach directly to your fluval intake hose. Removes organic film on the water's surface and helps improve the oxygen/carbon dioxide gas exchange.
EHEIM skim350 - the micro- surface skimmer for smaller aquariums up to 350 l. Simple, quick and flexible to use.
Ready to use immediately.
In almost any aquarium a film of including microorganisms, dust, oils and food fats forms over time - the mould film. With the EHEIM skim350 surface skimmer, you can efficiently eliminate this mould film and have a glass clear water surface and high oxygenation.
The EHEIM skim350, although designed for constant use is also suitable for short term use. If using alternately in several aquariums, please make sure that algae spores or diseases are not transmitted from one to the other.
The bacteria and dirt particles which are sucked in are collected in the filter sponge. This should be simply taken out and thoroughly cleaned after each use.
Eheim Surface Extractor skims off the protein layer which forms on the water surface, improving oxygen exchange. It also prevents undesirable biological processes on the water surface, by providing an optimum exchange of oxygen. This processes allows light to enter the aquarium unimpeded for better plant growth.
The extractor takes water through the strainer at the top and has a floating surface intake as well to help remove surface debris. The skimmer also features an automatic valve control mechanism and a surface outlet block circuit so the skimmer can be shut off for feeding.
The skimmer hooks up to the intake of the Eheim 2211, 2213, 2215, and 2217 filters. The T Reducer is needed when using the extractor with the 2217 filter. The Eheim Surface Suction Extractor is for suction filters up to 400gph. It is green to blend in with any natural setting.
The direction of flow must be towards the skimmer with the spray bar at the opposite side of the aquarium from the skimmer.
Size: 12" Long x 1" Diameter
For filters 2215, 2217, 2226, 2228, 2250, 2260, 2315, 2317, 2326 and 2328, a T-reducing piece is necessary, so that a bypass is created and two inlet lines are used. Additional tubing may also be required.
Filters 2215 and 2315 require EH4004950
Filters 2217, 2317, 2226, 2326, 2228 and 2328 require EH4005990
Filters 2250 and 2260 require EH4007990
Removes contamination on the water surface such as oil film effectively Having oil film on the water surface spoils the allurement of an aquascape. VUPPA-II developed with ADA's original structure eliminates such film effectively. And all hand-crafted stainless body does not spoil the appearance of the aquarium.
It can be installed to the frame-less tanks with thickness from 4~15mm, and it produces excellent ability from small to large tanks.
* The picture only shows the image of the product. Actual product has the electric cord from the top of the main body.
Dimension: Ø38×H110 (Excluding the projection parts.)
Voltage: 100v (need transformer for 220v use)