●Compact in size, free from the trouble of CO2 filling.
●Trendy supporting rack included to provide elegance and easy installation.
●High quality CO2 flow regulator provides constant and reliable CO2 dosing.
●Compact and quality acrylic CO2 diffuser promises the best diffusing effect.
$245.50ISTA 1L CO2 Aluminum Cylinder Set Face up - Premium
Included in set:
Duo Pressure gauge for accurate reading.
Bubble Counter included.
For Side-facing cylinders
ANS Brass Bubble Counter is fabricated out of brass metal and thick glasses that can withstand high pressurize CO2 output without losing shape. It clear glass column allows easy counting of CO2 bubbles. It is also integrate with a brass check valve to prevent back-flow of water.
Bubble counter is use to measure the amount of CO2 injected into your aquarium. It is important to know how much CO2 is injected to your aquarium as too much CO2 may suffocate your fishes and shrimp, while too little will stunned the growth of plants. As a guide, a fully planted aquarium should inject 1 bubble/second for every 30 – 45 liter of water. You can also get a CO2 Checker to check the amount of CO2 in your aquarium.
Inbuilt check valve
For 3Bar Co2 Only
*DOES NOT INCLUDE MAGNIFYING GLASS HOLDER*
Disposable 16g CO2 cartridge included to be free from CO2 refilling.
Trendy supporting rack included, provides convenient and easy installation.
High quality CO2 flow regulator provides constant and reliable CO2 supply.
Smart and quality acrylic diffuser promises the best diffusing effect.
Apply to 50 times of CO2 injection to the diffuser set.
Fasten the CO2 out let controlling node to the closed position.
Connect and fasten the pressure regulator to the CO2 cartridge until needle valve of the CO2 regulator punch through the CO2 cartridge to enable the CO2 release from the cartridge.
Connect the CO2 out let of the CO2 flow regulator and the diffuser set with a CO2 pipe.
Submerse and fasten the diffuser set in the tank then release remaining air in the diffuser set.
Gently and slowly turn on the controlling node of the CO2 flow regulator to inject the CO2 to the diffuser until the diffuser is completely full of CO2 gas.
Only turn loose the pressure regulator from the CO2 cartridge after the CO2 cartridge is completely empty.
To have the best effect, release remaining CO2 inside the diffuser set before CO2 refilling.
Elimate CO2 waste and provide high dissolution rate
Patented impeller design, completely dissolve CO2, no more waste.
Suitable with external filter and canister filter.
Easy to clean and maintain.
Made with durable material for preventing deformation and acid resistant.
Equipped with German-made solenoid with safety valve, assure quality, silence and safety.
Precision needle valve provides stable and accurate CO2 output.
Made with stainless steel, anti-rust.
Hand air-tighten design, no tool required.
Dual gauge indicators show different pressure volume, one indicate the pressure inside the bottle, and the other one shows the depressurize power.
Thread the controller tightly on the CO2 cylinder; turn on the cylinder on-off valve. Make sure to thread controller tightly with the cylinder, no CO2 leakage.
Unscrew the lid of Metal Bubble Counter and pour in 80% full of water. Screw back tightly the bubble counter lid and connect the air pipe on it.
Connect the controller with ISTA timer, which allows you to control the time of CO2 output.
To disassemble the controller, first, turn off the cylinder on-off valve tightly. Second, plug in the controller and turn on the adjustment valve in order to release the remaining CO2 inside. The controller can be disassembled from the cylinder until the pressure gauge shows zero.
ISTA 2 in 1 Metal Bubble Counter & Check Valve attahced, easier observation of CO2 flow and effectively present backflow.
Do not let controller get in touch with water, crash and fall down to the floor. Make sure the controller is set up straight.
Do not use wrench or tools to disassemble the controller.
Do not disassemble the controller from CO2 cylinder until the pressure gauge shows zero.
$3.00Air stone made of plastic, rust resistance. Check valve is made of silicone, long usage time.
Dymax produces a wide range of plant equipment down from fertilizer to instruments. To ensure they are most efficient and best in quality, the products have gone through strict quality control and efficiency examination. With all the standards we demanded, the user will have the assurance of our products and their highest achievements.
Never fail to monitor your CO2 & PH levels in aquarium by using this indicator. Monitoring co2 levels in your planted aquarium is very important for the health of your plants and fish. This kit is complete with everything that you will need. It includes: High quality drop checker and suction cup.
EXTREMELY EASY TO USE CO2 DROP CHECKER
To use simply fill the drop checker half way with the Co2 Indicator Solution. Place suction cup on the drop checker and place in your planted tank. Wait 2 hours to read Co2 levels.
HOW TO READ CO2 DROP CHECKER
When your co2 is off the drop checker solution will be a deep blue color. After co2 has been on for around 2 hours you should notice the color change. Optimal co2 concentration will be at 30ppm which will be a green-light green color. If it remains blue your co2 is too low. If the color turns yellow then your levels are too high and may harm your fish.
*****the solution is sold separately.
CO2 controller automatically control CO2 dosing.
3 in 1 CO2 diffuser, check valve and bubble counter.
CO2 indicator accurate monitoring CO2 level.
Simply in setting up and operation.
Pressure reduced design to provide most stable and reliable pressure out put.
CO2 controller to work with timer and control CO2 dosing automatically to avoid CO2 wasting.
Disposable CO2 cartridge free from refill problem and simply in assembling.
Trendy supporting base application of both stand or to hang.
3 in 1 Vertical CO2 Diffuser-S, with CO2 bubble counter, check valve and diffuser in one unit for space saving, easy in installation. Assures the best diffusing effect, easy for ceramic replacement.
Pipe holder to prevent CO2 pipe bending.
CO2 indicator provides continuous and accurate monitoring CO2 level, plastic color chart sticker is reusable for changing the location.
Special Permanently Elastic
The World's finest Precision Precision CO2 Nano Aquarium Diffuser Bazooka Atomizer 60mm
Nano design for small aquarium tank.
Excellent CO2 dissolution rates, easy maintenance and durable materials make this CO2 Nano Aquarium Diffuser a perfect choice for novice and expert aquascapers alike. Designed to be used like a regular glass CO2 atomizer diffuser, but offering higher CO2 dissolution rates, this diffuser is perfect for high-tech planted tanks.
Small, easy to clean and hard wearing - this is the perfect diffuser for pressurised CO2 injection.
A CO2 Nano Aquarium Diffuser optimizes the CO2 entering the aquarium for efficient plant absorption and less waste. As CO2 bubbles pass through the porous diffuser, they are diffused into streams of tiny bubbles. With increased surface area, the tiny CO2 bubbles are readily dissolved into the water, increasing the saturation of CO2 in the aquarium ecosystem.
To use this CO2 atomizer diffuser, simply connect your CO2 bottle regulator to the atomizer with our CO2 Tubing, and tighten the safety nut. It is recommended that you set the pressure on your regulator to around 1.5 bar as a starting point.
You should then lower the pressure of the regulator until the pressure is insufficient to force the CO2 through the atomizer, then increase slightly from this level.
The working pressure needed to use with atomizer will vary with regulators.
Please allow a few minutes for sufficient pressure to build up to allow the CO2 to begin passing through; it may not begin instantly.
2 STAGE PRESSURE GATE Torx REGULATOR WITH GERMANY SOLENOID COIL
Made with Duralumin, the INTENSE CO2 regulator solenoid outclass its
competitors through its excellent durability and its precision control of gas flow with parts from Japan and Germany.
Designed with simplicity, the INTENSE CO2 regulator solenoid allows users to hand tighten the regulator to the CO2 Cannister.
With the state of the art technology, Intense is the leading producer of CO2 system equipment through the introduction of impressive products such as the Bazooka Atomizer, the stylish Intense Regulator Solenoid and the professional Neo Solar LED Lamp.
Powering up your aquarium with Intense products would certainly create the stunning aquarium you desire
To suit Australian Standard AS2473 Type 30 cylinder taps
(Swivel Thread Type W21.8 DICI and UP, Ista cylinders)
Use Dymax CO2 Tablets to aid photosynthesis and provide nutrients for healthy plant growth.
$10.50ISTA CO2 Indicator
Specifications of the ISTA CO2 Controller
DYMAX CO2 Diffuser MD-107
Innovative design for mini plant aquariums, to obtain optimum diffusion of CO2 without any wastage. The diffuser works on the spinning action of incoming water from the top inlet into the reacting chamber together with the CO2 gas, colliding with the bio ball in order to obtain maximum efficiency of the diffusion. For tanks up to 120cm long. Used in conjunction with a PH200 power head and a CO2 supply.