The World's finest Precision Precision CO2 Nano Aquarium Diffuser Bazooka Atomizer 60mm
Nano design for small aquarium tank.
Excellent CO2 dissolution rates, easy maintenance and durable materials make this CO2 Nano Aquarium Diffuser a perfect choice for novice and expert aquascapers alike. Designed to be used like a regular glass CO2 atomizer diffuser, but offering higher CO2 dissolution rates, this diffuser is perfect for high-tech planted tanks.
Small, easy to clean and hard wearing - this is the perfect diffuser for pressurised CO2 injection.
A CO2 Nano Aquarium Diffuser optimizes the CO2 entering the aquarium for efficient plant absorption and less waste. As CO2 bubbles pass through the porous diffuser, they are diffused into streams of tiny bubbles. With increased surface area, the tiny CO2 bubbles are readily dissolved into the water, increasing the saturation of CO2 in the aquarium ecosystem.
To use this CO2 atomizer diffuser, simply connect your CO2 bottle regulator to the atomizer with our CO2 Tubing, and tighten the safety nut. It is recommended that you set the pressure on your regulator to around 1.5 bar as a starting point.
You should then lower the pressure of the regulator until the pressure is insufficient to force the CO2 through the atomizer, then increase slightly from this level.
The working pressure needed to use with atomizer will vary with regulators.
Please allow a few minutes for sufficient pressure to build up to allow the CO2 to begin passing through; it may not begin instantly.
$3.00Air stone made of plastic, rust resistance. Check valve is made of silicone, long usage time.
Dymax produces a wide range of plant equipment down from fertilizer to instruments. To ensure they are most efficient and best in quality, the products have gone through strict quality control and efficiency examination. With all the standards we demanded, the user will have the assurance of our products and their highest achievements.
Never fail to monitor your CO2 & PH levels in aquarium by using this indicator. Monitoring co2 levels in your planted aquarium is very important for the health of your plants and fish. This kit is complete with everything that you will need. It includes: High quality drop checker and suction cup.
EXTREMELY EASY TO USE CO2 DROP CHECKER
To use simply fill the drop checker half way with the Co2 Indicator Solution. Place suction cup on the drop checker and place in your planted tank. Wait 2 hours to read Co2 levels.
HOW TO READ CO2 DROP CHECKER
When your co2 is off the drop checker solution will be a deep blue color. After co2 has been on for around 2 hours you should notice the color change. Optimal co2 concentration will be at 30ppm which will be a green-light green color. If it remains blue your co2 is too low. If the color turns yellow then your levels are too high and may harm your fish.
*****the solution is sold separately.
CO2 controller automatically control CO2 dosing.
3 in 1 CO2 diffuser, check valve and bubble counter.
CO2 indicator accurate monitoring CO2 level.
Simply in setting up and operation.
Pressure reduced design to provide most stable and reliable pressure out put.
CO2 controller to work with timer and control CO2 dosing automatically to avoid CO2 wasting.
Disposable CO2 cartridge free from refill problem and simply in assembling.
Trendy supporting base application of both stand or to hang.
3 in 1 Vertical CO2 Diffuser-S, with CO2 bubble counter, check valve and diffuser in one unit for space saving, easy in installation. Assures the best diffusing effect, easy for ceramic replacement.
Pipe holder to prevent CO2 pipe bending.
CO2 indicator provides continuous and accurate monitoring CO2 level, plastic color chart sticker is reusable for changing the location.