Bioptim provides the BioDigest bacteria with the micronutrients needed to optimally purify saltwater and improve water quality.
When should Bioptim be used ?
How to use Bioptim ?
Stability® will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability® is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability® are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability® is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability® is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management.
The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability® does not contain any of the aforementioned bacteria.
Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture, see expiration date below.
Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix™. For emergency ammonia control, use Seachem AmGuard™.
Complex system of non-pathogenic aerobic and anaerobic microbes, as well as natural enzymes, specifically formulated to establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification, denitrification, and organic waste degradation in marine and freshwater aquaria through complete nutrient remineralization.
Supplied in a state of suspended animation for maximum longevity. Formulated utilizing extensive data compiled by microbiologists.
The concentration of dissolved and particulate organic materials in any aquatic environment can have a significant impact on the overall appearance of, as well as the health of organisms residing within, that system. Relatively low-nutrient environments are characterized by high water clarity, lack of unpleasant odors, and absence of microalgae and cyanobacteria; this is collectively a result of the lack of nitrogen-, phosphorus-, and carbon-based waste available. Aquaria that are relatively rich in available nutrients have characteristics opposite to the afore-mentioned, and are typically not desirable because of the resultant appearance of the system and the difficulty of maintaining healthy aquarium inhabitants.
Brightwell Aquatics MicroBacter7 is a selective complex of extremely effective microbes and enzymes that rapidly reduces the concentrations of organic nitrogen, ammonia, nitrite, nitrate, phosphate, and organic carbon in all marine and freshwater ecosystems, leading to greatly improved water quality; better water quality typically leads to healthier aquarium inhabitants. MicroBacter7 does not require refrigeration, however storage in a cool, shaded area will prolong the activity, and maximize the shelf-life, of the product.
Instructions and Guidelines:
Shake product well before using. Mix appropriate volume of MicroBacter7 (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to aquarium. If using a pipette to dispense MicroBacter7 below water level of container or aquarium, be sure to thoroughly clean pipette with fresh water prior to placing tube back into MicroBacter7 bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system (if applicable). Do not add to pump intake port(s). For best results, use within 1-year of purchase date. Grossly overdosing MicroBacter7 will not significantly increase the effectiveness of the product, nor the rate at which it enacts changes in aquaria. The following recommendations are based upon extensive testing and will produce the best results in most aquaria.
Medium- to High-nutrient Systems, or to seed Biological Filtration in new aquaria: To effectively decrease the concentration of available nutrients and waste material in all marine and freshwater aquaria, add 5 ml (1 capful) per 25 US-gallons (94.6 L) [˜4 drops per gallon (3.8 L)] of aquarium water daily for the first two weeks of use; the impact that MicroBacter7 has on an aquarium is most evident within this period. Turn protein skimming and UV-sterilization off for a period of 4 hours following addition to aquaria. A noticeable difference in water clarity is typically apparent within 30-minutes of dosing. Follow same instructions for new aquarium start-up. Thereafter, switch to “low-nutrient” dosage (below).
Stable, Low-nutrient Systems: To maintain a low concentration of available nutrients in all marine and freshwater aquaria, 5 ml (1 capful) of MicroBacter7 per 50 US-gallons (189.3 L) [˜2 drops per gallon (3.8 L)] of aquarium water no more than once each week; alternately, add 1 drop per 50 US-gallons daily (or 1 drop per 25 US-gallons every other day). Turn protein skimming and UV-sterilization off for a period of 4 hours following addition to aquaria. Dosage may be adjusted according to perceived benefit to aquarium, however it is recommended that the dosage not exceed 1 drop per 10 US-gallons per day. With time, hobbyists may determine that decreasing the dosage and/or dosing frequency by up to 50% sufficiently maintains a low-nutrient environment. During changes in biological filtration or when increasing the aquarium bioload, dose 1 drop per 25 US-gallons daily for one week, then resume “low-nutrient” dosage.
Keep out of reach of children. Not for human consumption.
Purified water, proprietary blend of natural enzymes and non-pathogenic, beneficial microorganisms.
In a new aquarium, harmful ammonia and nitrite build up from fish waste, often resulting in fish loss or “new tank syndrome”.The unique, patented nitrifying bacteria in QUICK START are scientifically proven to quickly consume ammonia and nitrite to help prevent “new tank syndrome.”
Allows immediate addition of fish to a new freshwater or saltwater aquarium.Use when starting a new aquarium, adding new fish, changing water, changing filter media, after medicating , or whenever ammonia or nitrite are detected.
Highly concentrated probiotic bacteria.Supplement contains several specially selected bacteria strains. Key function is to transform phosphate and nitrates to a biomass which can be easily removed by the skimmer or consumed by corals, sponges, clams and other organisms. Bacteria will significantly reduce organic sediment accumulating in the substrate & aquascaping elements. To achieve better results it’s recommended to place in the sump an additional bacteria medium like Siporax or sand.
ProBioS protects your tank against pathogenic organisms. Recommended to use in conjunction with ProF or ProBioF
Dosage: 1 drop per 100 litres(27 US gal.) daily
Shake well before use.
Once opened store it in the fridge.
Capacity: bottle of 10ml( 0.35 fl.oz.), 50ml( 1.7 fl.oz.).